Distributed Strain Monitoring of Railway Composite Bogies Using a Brillouin Optical Correlation Domain Analysis System
Open Access
- 28 September 2018
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 8 (10) , 1755
Abstract
The structural deformation of a bogie frame manufactured using a composite material was monitored in real time using a distributed optical fiber sensor. The bogie frame contained an internally embedded standard single-mode optical fiber. Performance tests were conducted by applying a vertical load to the middle of the side beams on each side of the composite bogie frame. The strain distribution was monitored using an optical fiber sensor. A distributed optical fiber sensor system based on the Brillouin optical correlation domain analysis (BOCDA) technique with a 3 cm spatial resolution was used. The distributed strain measured using the optical fiber correlated well with the finite element (FE) analysis data, confirming that the composite bogie frame was fabricated as designed. For a vertical load of 182 kN, the maximum strain, which occurred in the middle of the side frame, increased by 1.3 times, as compared with a vertical load of 140 kN. The experiment was able to verify the balance and the structural stability of the left- and right-hand-side beams. Furthermore, it could confirm that there was a concentrated load where the side beam and the crossbeam meet, owing to a mismatch during the assembly of the composite bogie frame.Keywords
Funding Information
- Korea Railroad Research Institute (2018)
This publication has 13 references indexed in Scilit:
- Material characterization of a multi-cavity composite structure for the bogie frame of urban maglev trainComposites Part B: Engineering, 2016
- Real-Time Distributed Strain Monitoring of a Railway Bridge during Train Passage by Using a Distributed Optical Fiber Sensor Based on Brillouin Optical Correlation Domain AnalysisJournal of Sensors, 2016
- Manufacturing and testing of a GFRP composite bogie frame with straight side beam membersJournal of Mechanical Science and Technology, 2013
- Manufacturing and structural behavior evaluation of composite side beams using autoclave curing and resin transfer moulding methodInternational Journal of Precision Engineering and Manufacturing, 2012
- Durability evaluation of a composite bogie frame with bow-shaped side beamsJournal of Mechanical Science and Technology, 2012
- Optimum design on suspension joint parts of GFRP composite bogie frame with H-shaped side beams for urban railway trainsInternational Journal of Precision Engineering and Manufacturing, 2012
- Evaluation of tension-compression and tension-tension fatigue life of woven fabric glass/epoxy laminate composites used in railway vehicleInternational Journal of Precision Engineering and Manufacturing, 2011
- Structural Behaviors of a GFRP Composite Bogie Frame for Urban Subway Trains under Critical Load ConditionsProcedia Engineering, 2011
- Design of a Composite Side Beam for the Railway Bogie FrameMaterials Science Forum, 2010
- Fatigue assessment of tilting bogie frame for Korean tilting train: Analysis and static testsEngineering Failure Analysis, 2006