Effects of the addition of small amounts of Al to copper: Corrosion, resistivity, adhesion, morphology, and diffusion

Authors:

Abstract
The properties of thin films of Cu with 1 at. % Al are explored. As‐deposited films of Cu(1 at. % Al) oxidize orders of magnitude more slowly than do those of pure Cu. After Cu(1 at. % Al) films are annealed in Ar at 400 °C for 30 min, very thin protective layers of aluminum oxide form on the surface. These thin oxide layers stop further oxidation of the copper. Cu(1 at. % Al) films also adhere better to SiO2 than do films of pure copper. Unlike pure Cu, films of Cu(1 at. % Al) remain microscopically smooth after anneals at temperatures up to 700 °C. In addition, Cu(1 at. % Al) films show no diffusion of Cu (as measured by Rutherford backscattering spectroscopy) into SiO2 at temperatures up to 700 °C. The addition of Al to Cu does increase its resistivity by about 2 μΩ cm per 1 at. % Al, but a possible procedure to avoid this problem is proposed.

This publication has 11 references indexed in Scilit: