Process-Metallurgy Interactions in Solid and Metal-Cored Wire Weld Deposits
Preprint
- 13 November 2026
- preprint
- Published by MDPI AG in Preprints.org
Abstract
Advances in welding automation have become essential for reducing operational costs and increasing productivity, while the development of new filler materials enables improved weld performance through optimized chemical composition and microstructural control. Within this context, this study compares the operational, economic, and mechanical performance of a metal-cored wire (Tubrod 70 MC Ultra) with that of a solid wire (ER70S-6) under automated welding conditions. A synergic welding power source was employed with fixed voltage and current, varying only the travel speed to generate three heat-input levels (0.8, 1.0, and 1.2 kJ.mm⁻¹). In the first stage, bead-on-plate welds were produced on SAE 1020 steel using both conventional and pulsed GMAW modes to assess arc stability and economic indices. Subsequently, the conditions that yielded the highest arc stability for each wire/process combination were used to weld four butt joints of SAE 1010 steel for mechanical and metallurgical evaluation of the deposited weld metal. Statistical analysis demonstrated that the lowest heat-input condition promoted the highest arc stability for both welding modes and both wires. Mechanical and metallurgical examinations showed comparable performance between the solid and metal-cored wires, with all results meeting the requirements of the referenced standards.Keywords
All Related Versions
This publication has 14 references indexed in Scilit:
- Effect of welding parameters on microstructure and mechanical properties of GMAW welded S275 steel welded zoneDiscover Materials, 2024
- Influence of controlled and conventional short circuit waveforms on mechanical and microstructural effects in the gas metal arc welding processesCase Studies in Thermal Engineering, 2024
- Characterization of cold metal transfer and conventional short-circuit gas metal arc welding processes for depositing tungsten carbide-reinforced metal matrix composite overlaysThe International Journal of Advanced Manufacturing Technology, 2023
- Effect of Heat Input on Microstructure and Mechanical Properties of Deposited Metal of E120C-K4 High Strength Steel Flux-Cored WireMaterials, 2023
- Performance optimization and investigation of metal-cored filler wires for high-strength steel during gas metal arc weldingHigh Temperature Materials and Processes, 2023
- Metal Transfer Behavior of Metal-Cored Arc Welding in Pure Argon Shielding GasMetals, 2022
- Assessment of arc stability features for selected gas metal arc welding conditionsSN Applied Sciences, 2022
- Effect of weld microstructure on the tensile properties and impact toughness of the naval, marine-grade steel weld jointsJournal of Materials Research and Technology, 2022
- Effect of metal transfer mode on spatter and arc stability in underwater flux-cored wire wet weldingJournal of Manufacturing Processes, 2018
- Measurement and calculation of arc power and heat transfer efficiency in pulsed gas metal arc weldingScience and Technology of Welding and Joining, 2003