Capillary-Assisted Evaporation/Boiling in PDMS Microchannel Integrated with Wicking Microstructures
Authors:
- 2 September 2020
- journal article
- research article
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 36 (41) , 12143-12149
Abstract
To enable rapid development of flexible microelectronic systems, effective thermal management is needed. Flexible Polydimethylsiloxane (PDMS)-based microchannel flow boiling may provide a desirable solution. However, the heat transfer performance of PDMS-based microchannels is diminished by its poor thermophysical properties. The development of PDMS wick is proposed to address this dilemma. Herein, a new PDMS wick structure is designed and integrated in the microfluidic device to significantly enhance its thermal performance by promoting capillary-driven flow. Furthermore, to achieve highly efficient vapor removal, a dedicated vapor pathway is designed in the microfluidic device. Experiments have been conducted to investigate the capillary-assisted evaporation/boiling for mass flux ranging from 70 kg/m2s to 245 kg/m2s on dielectric fluid HFE-7100. The capillary-assisted sustainable and stable thin film evaporation and efficient vapor removal have been demonstrated through the visualization studies. With this new wick design, the liquid rewetting at global and local levels is facilitated through the capillary-driven flow and the efficient vapor removal. This hybrid liquid rewetting mechanism is experimentally demonstrated to significantly enhance the capillary-assisted evaporation/boiling in PDMS-based microchannel. A critical heat flux (CHF) of 14.7 W/cm2 is achieved at a mass flux of 245 kg/m2s. The heat transfer coefficients (HTC) range from 2,000 W/m2K to 9,800 W/m2K. These values are comparable to that in copper/silicon microchannels, with the aforementioned benefits of flexibility. Equally importantly, stable two-phase transport is achieved as well.Keywords
Funding Information
- Advanced Research Projects Agency - Energy (DE-AR0001023)
This publication has 28 references indexed in Scilit:
- Flow boiling of HFE-7100 in silicon microchannels integrated with multiple micro-nozzles and reentry micro-cavitiesInternational Journal of Heat and Mass Transfer, 2018
- Two-dimensional heat transfer coefficients with simultaneous flow visualisations during two-phase flow boiling in a PDMS microchannelApplied Thermal Engineering, 2018
- Physics of microstructures enhancement of thin film evaporation heat transfer in microchannels flow boilingScientific Reports, 2017
- Enhanced flow boiling in microchannels through integrating multiple micro-nozzles and reentry microcavitiesApplied Physics Letters, 2017
- Flow boiling heat transfer of HFE-7000 in nanowire-coated microchannelsApplied Thermal Engineering, 2016
- Experimental and theoretical studies of critical heat flux of flow boiling in microchannels with microbubble-excited high-frequency two-phase oscillationsInternational Journal of Heat and Mass Transfer, 2015
- Printed dose-recording tag based on organic complementary circuits and ferroelectric nonvolatile memoriesScientific Reports, 2015
- Nano- and Microstructures for Thin-Film Evaporation—A ReviewNanoscale and Microscale Thermophysical Engineering, 2014
- Sophisticated skinNature Materials, 2013
- Do surfaces with mixed hydrophilic and hydrophobic areas enhance pool boiling?Applied Physics Letters, 2010