Flat-joint model to reproduce the mechanical behaviour of intact rocks
- 31 March 2019
- journal article
- research article
- Published by Taylor & Francis in European Journal of Environmental and Civil Engineering
- Vol. 25 (8) , 1427-1448
Abstract
The mechanical behaviour of intact rock materials is controlled by properties of grains and cementation (bonding) between grains. In the particle flow code (PFC), three main bonding approaches namely contact bond (CB), parallel bond (BP) and flat-joint (FJ) models have been used for simulation of bond between particles. This article firstly investigates the ability of these bonding approaches in reproducing the mechanical behaviour of intact rocks through a comparison against laboratory experiments undertaken on Hawkesbury sandstone. The results show that the FJ model, unlike CB and PB models, is able to reproduce the mechanical behaviour of Hawkesbury sandstone under different loading conditions. As the effect of micro-parameters of the FJ model on the laboratory-scale mechanical properties is not well-understood, a comprehensive parametric study was undertaken. The results show that the tensile strength of material is mainly controlled by the FJ-bonded fraction and the FJ tensile strength whereas several micro-parameters control the uniaxial compressive strength due to contribution of both tensile and shear cracks in the failure mechanism. Finally, a new calibration approach was suggested to ease the determination of micro-parameters and minimise the iteration process.Keywords
This publication has 39 references indexed in Scilit:
- A Bonded Particle Model Simulation of Shear Strength and Asperity Degradation for Rough Rock FracturesRock Mechanics and Rock Engineering, 2012
- Compressive strength of an unsaturated granular material during cementationPowder Technology, 2011
- The synthetic rock mass approach for jointed rock mass modellingInternational Journal of Rock Mechanics and Mining Sciences, 2011
- Physical and numerical investigation of a cemented granular assembly of steel spheresInternational Journal for Numerical and Analytical Methods in Geomechanics, 2010
- Empirical and numerical approaches for geomechanical characterization of coal seam reservoirsInternational Journal of Coal Geology, 2010
- Modeling Lac du Bonnet granite using a discrete element modelInternational Journal of Rock Mechanics and Mining Sciences, 2009
- The impact of porosity and crack density on the elasticity, strength and friction of cohesive granular materials: Insights from DEM modellingInternational Journal of Rock Mechanics and Mining Sciences, 2009
- Discrete modelling of granular materials and geotechnical problemsEuropean Journal of Environmental and Civil Engineering, 2008
- A simple and efficient approach to capturing bonding effect in naturally microstructured sands by discrete element methodInternational Journal for Numerical Methods in Engineering, 2006
- NUMERICAL MODELLING OF DISCONTINUAEngineering Computations, 1992