Effect of Silicon Content on Microstructures and Properties of Directionally Solidified Fe-B Alloy
Open Access
Abstract
In order to investigate the effect of Si content on the microstructures and properties of directionally solidified (DS) Fe-B alloy, a scanning electron microscope (SEM) with an energy dispersive spectrum (EDS), and X-ray diffraction have been employed to investigate the as-cast microstructures of DS Fe-B alloy. The results show that Si can strongly refine the columnar microstructures of the DS Fe-B alloy, and the columnar grain thickness of the oriented Fe2B is reduced with the increase of Si addition. In addition, Si is mainly distributed in the ferrite matrix, almost does not dissolve in boride, and seems to segregate in the center of the columnar ferrite to cause a strong solid solution strengthening and refinement effect on the matrix, thus raising the microhardness of the matrix and bulk hardness of the DS Fe-B alloy.Keywords
Funding Information
- Funds of National Joint Engineering Research Center for abrasion control and molding of metal materials (HKDNM201801, 52071254, 51771143, xzy012020002)
- National Natural Science Foundation of China (HKDNM201801, 52071254, 51771143, xzy012020002)
- National Natural Science Foundation of China (HKDNM201801, 52071254, 51771143, xzy012020002)
- Foundational Research Funds for the Central Universities (HKDNM201801, 52071254, 51771143, xzy012020002)
This publication has 36 references indexed in Scilit:
- Effects of hot rolling and titanium content on the microstructure and mechanical properties of high boron Fe–B alloysMaterials & Design (1980-2015), 2012
- Supersolidus liquid-phase sintering of ultrahigh-boron high-carbon steels for wear-protection applicationsMaterials Science and Engineering: A, 2012
- Effect of (Fe,Cr)7C3 carbide orientation on abrasion wear resistance and fracture toughnessWear, 2011
- Microstructure and mechanical properties of high boron white cast ironMaterials Science and Engineering: A, 2008
- Effect of rare earth and titanium additions on the microstructures and properties of low carbon Fe–B cast steelMaterials Science and Engineering: A, 2007
- Evaluation of borides formed on AISI P20 steelMaterials & Design (1980-2015), 2007
- Microstructural and crystallographical study of carbides in 30wt.%Cr cast ironsActa Materialia, 2005
- Heat treatment of multi-element low alloy wear-resistant steelMaterials Science and Engineering: A, 2005
- A step towards designing Fe–Cr–B–C cast alloysMaterials Science and Engineering: A, 2001
- Effect of carbide orientation on abrasion of high Cr white cast ironWear, 1995