System identification and microposition control of ionic polymer metal composite for three-finger gripper manipulation
Authors:
- 1 November 2006
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering
- Vol. 220 (7) , 539-551
Abstract
Smart materials have been widely used for control actuation. A robotic hand can be equipped with artificial tendons and sensors for the operation of its various joints, mimicking human hand motions. The motors in the robotic hand could be replaced with novel electro-active polymer (EAP) actuators. In the three-finger gripper proposed in this paper, each finger can be actuated individually so that dexterous handling is possible, allowing precise manipulation. To develop model-based control laws, an approximated linear model representing the electromechanical behaviour of the gripper fingers is introduced. Several chirp voltage signal inputs were applied to excite the IPMC (ionic polymer metal composite) actuators in the interesting frequency range of (0.62 Hz, 5 Hz) for 30 s at a sampling frequency of 250 Hz. The linear Box-Jenkins (BJ) model was well matched with the model obtained using a stochastic power spectral method. With feedback control, the large overshoot, rise time, and settling time associated with the inherent material properties were reduced. The motions of the IPMC fingers in the microgripper would be coordinated to pick, move, and release a macro- or micro-part. The precise manipulation of this three-finger gripper was successfully demonstrated with experimental closed-loop responses.Keywords
This publication has 23 references indexed in Scilit:
- Equivalent modeling for ionic polymer–metal composite actuators based on beam theoriesSmart Materials and Structures, 2005
- Enhancement of the electromechanical behavior of IPMCs based on chitosan/polyaniline ion exchange membranes fabricated by freeze-dryingSmart Materials and Structures, 2005
- Low temperature characteristics of ionic polymer–metal composite actuatorsSensors and Actuators A: Physical, 2004
- Comparative experimental study of ionic polymer–metal composites with different backbone ionomers and in various cation formsJournal of Applied Physics, 2003
- Mechanical characteristics of ionic polymer-metal composite in the process of self-bendingJournal of Applied Physics, 2002
- Experimental Study of Ionic Polymer-Metal Composites in Various Cation Forms: Actuation BehaviorScience and Engineering of Composite Materials, 2002
- A novel method of manufacturing three-dimensional ionic polymer–metal composites (IPMCs) biomimetic sensors, actuators and artificial musclesPolymer, 2002
- Ionic polymer-metal composites: I. FundamentalsSmart Materials and Structures, 2001
- The effect of surface-electrode resistance on the performance of ionic polymer-metal composite (IPMC) artificial musclesSmart Materials and Structures, 2000
- Electromechanical response of ionic polymer-metal compositesJournal of Applied Physics, 2000