Recycling of rigid polyurethane foam: Micro‐milled powder used as active filler in polyurethane adhesives
- 20 February 2020
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 137 (37)
Abstract
Rigid polyurethane (PUR) foams are widely used as heat insulation material in construction industry or for electronic appliances manufacturing. After finishing their life‐time, it is necessary to eliminate foam wastes. The aim of this study was to prepare a pair of industrial PUR adhesives of medium viscosity containing recycled rigid PUR foam. Three methods of milling were tested: knife‐milling, two‐roll milling, and ball‐milling. Only two‐roll milling gives the PUR micro‐powder usable for following adhesives modification. The micro‐powder was used as passive filler in PUR adhesives and potential reactivity for polyol pack replacement was studied. Hydroxyl and amine numbers were determined in mixture with virgin polyol. One‐component PUR prepolymer adhesive was prepared using various dosages of the micro powder and the tensile strength of bound wood was measured. As additional parameters, also free film adhesive mechanical parameters were tested and particle size distribution of the micro powder was analyzed. Two adhesive formulations were prepared for independent evaluation of the micro powder reactivity. The results showed growing of the mechanical strength of wood bonding with growing dosage of the micro powder.Keywords
Funding Information
- Akademie Věd České Republiky (RVO 68378297)
This publication has 20 references indexed in Scilit:
- Thermoplastic polyurethane composites prepared from mechanochemically activated waste cotton fabric and reclaimed polyurethane foamJournal of Applied Polymer Science, 2012
- Validity of particle size analysis techniques for measurement of the attrition that occurs during vacuum agitated powder drying of needle-shaped particlesThe Analyst, 2011
- Chemical degradation of thermoplastic polyurethane for recycling polyether polyolFibers and Polymers, 2011
- An Investigation on Reactivity, Mechanical and Fire Properties of Pu Flexible FoamJournal of Cellular Plastics, 2009
- New Reclaiming Process of Thermoset Polyurethane Foam and Blending with Polyamide-12 and Thermoplastic PolyurethaneJournal of Elastomers & Plastics, 2009
- Influence of the use of recycled polyols obtained by glycolysis on the preparation and physical properties of flexible polyurethaneJournal of Applied Polymer Science, 2008
- Effects of silicon surfactant in rigid polyurethane foamsExpress Polymer Letters, 2008
- Biodegradation of polyurethane: a reviewInternational Biodeterioration & Biodegradation, 2002
- Polyurethane rigid foam, a proven thermal insulating material for applications between +130°C and −196°CCryogenics, 1998
- Preparation of epoxy hardeners from waste rigid polyurethane foam and their applicationJournal of Applied Polymer Science, 1995