Investigation of the influence of global stresses and strains on the magnetic properties of electrical steels with varying alloying content and grain size
Authors:
- 1 September 2015
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-8
Abstract
The process of manufacturing iron cores for electric machines out of electrical steel can drastically influence the magnetic properties of the material. It is well known that the local soft magnetic properties are degraded by the cutting process. In the production process the material also experiences tensile and compressive stress, i.e. when pressing the stator core into motor housing. In this work, the influence of these stresses on the soft magnetic properties of six different 0.35 mm thick fully processed non-oriented electrical steels with varying alloy content and varying grain size is studied on 30 mm wide and 300 mm long strip samples. A single strip testing setup with force in field direction applied to the specimen is used. This field metric method allows for quantitative analysis of the magnetic properties and ac iron losses as a function of the applied stress. For the specific case of 1.0 T and 400 Hz measured in rolling direction on one material the application of tensile stress first leads to a decrease in the losses, up to a stress of 30 MPa. For higher stresses the losses increase again by 11 % at an applied strain of 100 MPa. The results for compressive stress look significantly different: the application of stress always leads to an increase of the losses. At -40 MPa, the iron losses increase by 64 %. These effects are stronger the lower the polarization or frequency of the applied magnetic field is chosen. The Bertotti model is used to separate the static (hysteresis) and dynamic (eddy current and excess) losses. We discuss the observed deteriorations as an effect of the inverse magnetostriction, which leads to changes in the magnetoelastic energy.Keywords
This publication has 21 references indexed in Scilit:
- Effect of Si Content on Iron Loss of Electrical Steel Sheet Under Compressive StressIEEE Transactions on Magnetics, 2014
- Magnetic Properties of Particular Shape Specimen of Nonoriented Electrical Steel Sheet Under Compressive Stress in Thickness DirectionIEEE Transactions on Magnetics, 2012
- Influence of Compressive Stress on Magnetic Properties of Laminated Electrical Steel SheetsIEEE Transactions on Magnetics, 2010
- Loss separation and parameters for hysteresis modelling under compressive and tensile stressesJournal of Magnetism and Magnetic Materials, 2004
- Magnetic behaviour versus tensile deformation mechanisms in a non-oriented Fe–(3 wt.%)Si steelMaterials Science and Engineering: A, 2003
- Magnetic characterisation of elastically and plastically tensile strained non-oriented Fe–3.2%Si steelJournal of Magnetism and Magnetic Materials, 2003
- Measuring setup for the investigation of the influence of mechanical stresses on magnetic properties of electrical steelJournal of Magnetism and Magnetic Materials, 2003
- Dependence of power losses on tensile stress for Fe–Si nonoriented steel up to destructionJournal of Applied Physics, 2002
- Power losses and magnetization process in Fe–Si non-oriented steels under tensile and compressive stressJournal of Magnetism and Magnetic Materials, 2000
- Effect of plastic deformation on the magnetic properties of non-oriented electrical steelsJournal of Magnetism and Magnetic Materials, 2000