Evaluation of impact, thermo‐physical properties, and morphology of cornhusk fiber‐reinforced polyester composites
- 4 March 2022
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 43 (5) , 2771-2778
Abstract
This study aims to investigate the thermo‐physical and morphological morphology of cornhusk fiber‐reinforced polyester composites. The content of corn husk fiber (CHFs) has been varied, namely 20, 30, 40, and 50 (% vol.) in the polyester composite, respectively. The hot press technique has been used in the manufacture of these composites, then properties were investigated through thermo‐physical tests including differential scanning calorimetry, thermogravimetry, Fourier transforms infrared, impact strength properties, and morphology using SEM. The results showed that the composite containing 30% CHF (KJP2) was found to have the most optimal impact strength (4.25 KJ/m2), and the best thermal resistance properties were found in the KJP3 composite, compared with other composites; due to CHF dispersion and good interfacial adhesion between CHF and polyester. SEM images of the fracture of the impact test specimens of the composites show better interfacial bonding between CHFs and polyester.Keywords
Funding Information
- King Mongkut's University of Technology North Bangkok (KMUTNB‐65‐BASIC‐12)
This publication has 43 references indexed in Scilit:
- Natural hemp fiber reinforced polybenzoxazine composites: Curing behavior, mechanical and thermal propertiesComposites Science and Technology, 2017
- Corn Husk Fiber-Polyester Composites as Sound Absorber: Nonacoustical and Acoustical PropertiesAdvances in Acoustics and Vibration, 2017
- Evaluation of corn husk fibers reinforced recycled low density polyethylene compositesMaterials Chemistry and Physics, 2015
- Mechanical properties of soy protein based “green” composites reinforced with surface modified cornhusk fiberIndustrial Crops and Products, 2014
- Influence of fiber content on the mechanical and thermal properties of Kenaf fiber reinforced thermoplastic polyurethane compositesMaterials & Design (1980-2015), 2012
- Potential use of natural fiber composite materials in IndiaJournal of Reinforced Plastics and Composites, 2010
- Impact Strength and Hardness Properties of Banana Pseudo‐Stem Filled Unplastisized PVC CompositesMultidiscipline Modeling in Materials and Structures, 2009
- Experimental investigation of stamp forming of unconsolidated commingled E-glass/polypropylene fabricsComposites Science and Technology, 2006
- FTIR spectroscopic investigation of inorganic fillers for composite DMFC membranesElectrochemistry Communications, 2003
- FTIR spectroscopic investigation of the active sites on different types of silica catalysts for methane partial oxidation to formaldehydeCatalysis Letters, 1996