PTFE-Based Solid Polymer Electrolyte Membrane for High-Temperature Fuel Cell Applications
Authors:
Open Access
- 1 January 2007
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 154 (3) , B327-B333
Abstract
The demand for a solid polymer electrolyte membrane for fuel-cell systems, capable of withstanding temperatures above 130°C130°C , has prompted this study. A low-cost, highly conductive, nanoporous proton-conducting membrane, based on a polytetrafluoroethylene (PTFE) backbone has been developed. It comprises a nonconductive nano-size ceramic powder, PTFE matrix, and an aqueous acid. Impregnation of the ceramic powder into the PTFE matrix was carried out using sol-gel synthesis. The preparation procedures were studied and the membrane was characterized. This membrane demonstrated promising properties of high thermal stability (up to 300°C300°C ), pressure-retention difference up to 2.2bars2.2bars , room-temperature conductivity up to 0.11Scm−10.11Scm−1 (10–15% (w/w) SiO2SiO2 , 3M3M H2SO4H2SO4 ), a hydrophilic/hydrophobic pore ratio of 1:1 and very high water flow at low pressure. A nonoptimized direct-methanol fuel cell with a 137μm137μm thick membrane was assembled and tested. It produced 133mWcm−2133mWcm−2 at 80°C80°C , 0.05bars0.05bars (g) dry air, 1.9 stoich (air), and 198mWcm−2198mWcm−2 at 110°C110°C , 2.2bars2.2bars (g) dry air, 1.9 stoich (air).Keywords
This publication has 26 references indexed in Scilit:
- Advanced materials for improved PEMFC performance and lifeJournal of Power Sources, 2004
- Non-Fluorinated Polymer Materials for Proton Exchange Membrane Fuel CellsAnnual Review of Materials Research, 2003
- Quantum jumps in the PEMFC science and technology from the 1960s to the year 2000Journal of Power Sources, 2001
- Approaches and technical challenges to high temperature operation of proton exchange membrane fuel cellsJournal of Power Sources, 2001
- On the development of proton conducting polymer membranes for hydrogen and methanol fuel cellsJournal of Membrane Science, 2001
- A Direct Methanol Fuel Cell Based on a Novel Low-Cost Nanoporous Proton-Conducting MembraneElectrochemical and Solid-State Letters, 1999
- On the development of proton conducting materials for technological applicationsSolid State Ionics, 1997
- Membrane‐Supported Nonvolatile Acidic Electrolytes Allow Higher Temperature Operation of Proton‐Exchange Membrane Fuel CellsJournal of the Electrochemical Society, 1997
- A fuel cell using acid doped polybenzimidazole as polymer electrolyteElectrochimica Acta, 1996
- A Polymer Electrolyte for Operation at Temperatures up to 200°CJournal of the Electrochemical Society, 1994