Development of Strain-Rate Testing and Its Implications
Author:
- 1 January 1979
- book chapter
- Published by ASTM International
- p. 5-25
Abstract
The application of slow dynamic straining to specimens to facilitate stress corrosion cracking (SCC) now has been in use for more than a decade, and the test is beginning to emerge as one that has much more relevance than the rapid sorting test to which its early use was related. The importance of creep effects in constant load testing is considered, and it is shown that reasonable predictions of threshold stresses for SCC can be made from relevant creep data and that the effects of prior creep upon the incidence of cracking and of the phenomenon of nonpropagating cracks below the threshold stress are all in agreement with the concept of the crack tip strain rate playing a major role, even under constant load conditions. The reasonable correlation between appropriate strain rate and constant load tests is therefore not surprising, nor is the reduction in threshold stress by dynamic straining, with or without cyclic loading, over that observed for constant loads.Keywords
This publication has 10 references indexed in Scilit:
- The interface between corrosion fatigue and stress-corrosion crackingMetal Science, 1977
- Creep induced by load cycling in a C-Mn steelActa Metallurgica, 1976
- Role of Stress in the Stress Corrosion Cracking of a Mg-Al AlloyCorrosion, 1973
- Effects of Quenching and Tempering upon the Stress Corrosion Cracking of Ferritic SteelsBritish Corrosion Journal, 1973
- Stress Corrosion Test MethodsBritish Corrosion Journal, 1972
- The Role of Interstitial and Substitutional Impurities in Stress Corrosion Cracking of Low Carbon Steel in Nitrate SolutionCorrosion, 1968
- Some Aspects of the Influence of Structure upon Stress-Corrosion Cracking and Grain Boundary Corrosion in Mild SteelsBritish Corrosion Journal, 1967
- Stress-corrosion cracking of mild steels in sodium hydroxide solutions containing various additional substancesCorrosion Science, 1967
- Some aspects of stress-corrosion crack propagation in mild steelCorrosion Science, 1966
- On a surface energy mechanism for stress-corrosion crackingActa Metallurgica, 1961