Effects of Injection Timing on CAI Operation in a 2/4-Stroke Switchable GDI Engine
Authors:
- 30 August 2011
- journal article
- Published by SAE International in SAE International Journal of Engines
- Vol. 05 (2) , 67-75
Abstract
A single cylinder direct injection gasoline engine has been developed and commissioned on a transient engine test bed in order to study different engine cycles and combustion modes with identical hardware and operating conditions. The engine can be operated in either 4-stroke cycle or 2-stroke cycle by means of an electro-hydraulic camless system. In addition, both spark ignition and controlled autoignition (CAI) combustion can be achieved. In this paper, effects of the injection timing on different CAI combustion modes are investigated, including the residual gas trapping and exhaust gas rebreathing CAI operations in 4-stroke mode, and also 2-stroke CAI operation, with a stoichiometric air fuel ratio and homogeneous charge used throughout. The performance and emission data are presented and analysed as a function of the injection timing. Results show that the charge cooling effect on the intake flow rate is dependent upon the in-cylinder temperature at the time of injection. The piston wetting by the direct fuel injection should be minimized in order to reduce the high HC emissions and further improve the fuel consumption. Fuel injection timing was also found to affect the combustion phasing through the effect of charge cooling and piston wetting.Keywords
This publication has 11 references indexed in Scilit:
- Overview of gasoline direct injection engines2010
- HCCI and CAI Engines for the Automotive Industry2007
- HCCI and CAI engines for the automotive industry2007
- Potentials of the Spray-Guided BMW DI Combustion SystemSAE International Journal of Advances and Current Practices in Mobility, 2006
- Development of V-6 3.5-liter Engine Adopting New Direct Injection SystemSAE International Journal of Advances and Current Practices in Mobility, 2006
- Development of a Two-Stroke/Four-Stroke Switching Gasoline Engine - The 2/4SIGHT ConceptSAE International Journal of Advances and Current Practices in Mobility, 2005
- Cam Profile Switching (CPS) and Phasing Strategy vs Fully Variable Valve Train (FVVT) Strategy for Transitions between Spark Ignition and Controlled Auto Ignition ModesSAE International Journal of Advances and Current Practices in Mobility, 2005
- CSI - Controlled Auto Ignition - the Best Solution for the Fuel Consumption - Versus Emission Trade-Off?SAE International Journal of Advances and Current Practices in Mobility, 2003
- Controlled Auto Ignition Combustion Process with an Electromechanical Valve TrainSAE International Journal of Advances and Current Practices in Mobility, 2003
- Development of Direct Injection Gasoline EngineSAE International Journal of Advances and Current Practices in Mobility, 1997