Numerical Simulations of Molten Breakup Behaviors of a de Laval-Type Nozzle, and the Effects of Atomization Parameters on Particle Size Distribution
Open Access
Abstract
In this work, an atomizer with a de Laval-type nozzle is designed and studied by commercial computational fluid dynamics (CFD) software, and the secondary breakup process during atomization is simulated by two-way coupling and the discrete particle model (DPM) using the Euler-Lagrange method. The simulation result demonstrates that the gas flow patterns greatly change with the introduction of liquid droplets, which clearly indicates that the mass loading effect is quite significant as a result of the gas-droplet interactions. An hourglass shape of the cloud of disintegrating molten metal particles is observed by using a stochastic tracking model. Finally, this simulation approach is used for the quantitative evaluation of the effects of altering the atomizing process conditions (gas-to-melt ratio, operating pressure P, and operating gas temperature T) and nozzle geometry (protrusion length h, half-taper angle α, and gas slit nozzle diameter D) on the particle size distribution of the powders produced.Keywords
Funding Information
- National Key Research and Development Program of China (2017YFB0306102)
- National Natural Science Foundation of China (51271034)
This publication has 32 references indexed in Scilit:
- A computational fluid dynamics (CFD) investigation of the flow field and the primary atomization of the close coupled atomizerComputers & Chemical Engineering, 2012
- Modelling of the break up mechanism in gas atomization of liquid metals Part II. The gas flow modelComputational Materials Science, 2009
- Choking Phenomena in a Vortex Flow Passing a Laval Tube: An Analytical TreatmentJournal of Fluids Engineering, 2009
- Modelling of the break up mechanism in gas atomization of liquid metals. Part I: The surface wave formation modelComputational Materials Science, 2006
- A STUDY OF LIQUID METAL ATOMIZATION USING CLOSE-COUPLED NOZZLES, PART 1: GAS DYNAMIC BEHAVIORAtomization and Sprays, 2005
- LES of atomizing spray with stochastic modeling of secondary breakupInternational Journal of Multiphase Flow, 2003
- Jet break up of liquid metal in twin fluid atomisationMaterials Science and Engineering: A, 2002
- Design and characteristic analysis of supersonic nozzles for high gas pressure laser cuttingJournal of Materials Processing Technology, 1997
- Effect of alteration of the acetic acid synthesis pathway on the fermentation pattern of escherichia coliBiotechnology and Bioengineering, 1991
- Optimum Design of Wind Tunnel ContractionsAIAA Journal, 1979