Effect of molecular weight of epoxidized natural rubber on shear strength of adhesives
Authors:
- 19 August 2009
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 114 (6) , 3976-3979
Abstract
The dependence of shear strength of epoxidized natural rubber (ENR)‐based adhesives on molecular weight of the rubber is studied using coumarone–indene resin, gum rosin, and petro resin as tackifiers. The adhesive was coated on polyethylene terephthalate (PET) film substrate using a SHEEN hand coater at various coating thickness. The shear strength of adhesives was determined by a Texture Analyzer. Results show a maximum at 6.63 × 104 and 4.14 × 104 for ENR 25 and ENR 50, respectively, after which the shear strength decreases with further increases in molecular weight for all the coating thickness. This observation is attributed to varying degree of cohesiveness which culminates at the respective optimum molecular weight of ENR. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009Keywords
This publication has 10 references indexed in Scilit:
- Viscosity and shear strength of natural‐rubber‐based adhesives in the presence of gum rosin and petroresinJournal of Applied Polymer Science, 2008
- Adhesion properties of pressure‐sensitive adhesives prepared from SMR 10/ENR 25, SMR 10/ENR 50, and ENR 25/ENR 50 blendsJournal of Applied Polymer Science, 2008
- Adhesion property of epoxidized natural rubber (ENR)-based adhesives containing calcium carbonateExpress Polymer Letters, 2008
- Effect of zinc oxide on the viscosity, tack, and peel strength of ENR 25‐based pressure‐sensitive adhesivesJournal of Applied Polymer Science, 2007
- Peel and shear strength of pressure‐sensitive adhesives prepared from epoxidized natural rubberJournal of Applied Polymer Science, 2007
- Epoxidized natural rubber‐bonded para rubber wood particleboardPolymer Engineering & Science, 2007
- The viscoelastic properties of natural rubber pressure‐sensitive adhesive using acrylic resin as a tackifierJournal of Applied Polymer Science, 2003
- Effects of miscibility and viscoelasticity on shear creep resistance of natural-rubber-based pressure-sensitive adhesivesJournal of Applied Polymer Science, 2000
- Structural changes in melts of butadiene–styrene and isoprene–styrene block polymer-based pressure-sensitive adhesivesJournal of Applied Polymer Science, 1982
- The entanglement plateau in the dynamic modulus of rubbery styrene–diene block copolymers. Significance to pressure-sensitive adhesive formulationsJournal of Applied Polymer Science, 1977