Effects of cooling type on mechanical properties of concrete produced with slag-modified cement exposed to high temperatures
Open Access
- 6 November 2023
- journal article
- research article
- Published by Universidade Estadual de Maringa in Acta Scientiarum. Technology
- Vol. 46 (1) , e66726
Abstract
Effects of different cooling methods on residual mechanical properties of normal-strength concretes produced with slag-modified cements were not reported in previous literature. Therefore, a (2 x 2 x 4) factorial experiment was carried out in the present study to investigate the compressive strength and elastic modulus of slag-modified cement concretes with different strength levels (characteristic compressive strength of 20 and 30 MPa) subjected to different maximum temperatures (200, 400, 600, or 800ºC) and cooling procedures (slow or fast cooling). According to analyses of variance (ANOVA), air-cooled specimens showed higher residual mechanical properties. Higher residual elastic modulus was observed in concretes with higher initial strength, whereas residual strength was only affected by initial strength for higher temperatures. Effects of different cooling methods were more pronounced in slag-modified concretes than in concretes produced with ordinary Portland cement, especially for temperature up to 400ºC. Since slag-modified concretes have lower calcium hydroxide content, volume expansion and cracking propagation due to lime rehydration during slow cooling were mitigated, leading to higher post-fire mechanical properties. In contrast, these types of concrete exhibited significant temperature difference along their cross-section when fast cooling was used, so that a substantial thermal shock caused limited post-fire mechanical properties. Effects of different cooling methods on residual mechanical properties of normal-strength concretes produced with slag-modified cements were not reported in previous literature. Therefore, a (2 x 2 x 4) factorial experiment was carried out in the present study to investigate the compressive strength and elastic modulus of slag-modified cement concretes with different strength levels (characteristic compressive strength of 20 and 30 MPa) subjected to different maximum temperatures (200, 400, 600, or 800ºC) and cooling procedures (slow or fast cooling). According to analyses of variance (ANOVA), air-cooled specimens showed higher residual mechanical properties. Higher residual elastic modulus was observed in concretes with higher initial strength, whereas residual strength was only affected by initial strength for higher temperatures. Effects of different cooling methods were more pronounced in slag-modified concretes than in concretes produced with ordinary Portland cement, especially for temperature up to 400ºC. Since slag-modified concretes have lower calcium hydroxide content, volume expansion and cracking propagation due to lime rehydration during slow cooling were mitigated, leading to higher post-fire mechanical properties. In contrast, these types of concrete exhibited significant temperature difference along their cross-section when fast cooling was used, so that a substantial thermal shock caused limited post-fire mechanical properties.Keywords
This publication has 38 references indexed in Scilit:
- Improved fire resistance by using Portland-pozzolana or Portland-fly ash cementsJournal of Thermal Analysis and Calorimetry, 2017
- Improved fire resistance by using slag cementsJournal of Thermal Analysis and Calorimetry, 2016
- Mechanical properties of concrete at high temperature—A reviewConstruction and Building Materials, 2015
- Effect of cooling methods on residual compressive strength and cracking behavior of fly ash concretes exposed at elevated temperaturesFire and Materials, 2014
- The performance of Fly ash and Metakaolin concrete at elevated temperaturesConstruction and Building Materials, 2014
- Physico-chemical, morphological and thermal analysis for the combined pozzolanic activities of minerals additivesConstruction and Building Materials, 2009
- Effect of elevated temperatures and cooling regimes on normal strength concreteFire and Materials, 2008
- Effect of thermal shock due to rapid cooling on residual mechanical properties of fiber concrete exposed to high temperaturesConstruction and Building Materials, 2008
- Effect of high temperatures on high performance steel fibre reinforced concreteCement and Concrete Research, 2006
- Postfire full stress–strain response of fire‐damaged concreteFire and Materials, 2005