ITP-PAD: A Timing Monitoring Mechanism for AVS Systems Using Intersection Timing Prediction and Path Activation Detection
- 19 February 2025
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 72 (5) , 753-757
Abstract
In-situ timing monitoring technology is widely used in adaptive voltage scaling (AVS) system to provide real-time timing information, enabling the elimination of timing margins preserved for PVT variations. However, the increased number of monitors and the short-path issue result in significant overhead. In this paper, a low-cost in-situ mechanism, intersection timing prediction and path activation detection (ITP-PAD), is proposed. It performs timing monitoring and path activation detection at the intersection of critical paths. Additionally, critical path replica (CPR) is introduced to support the ITP-PAD. A low-overhead 12-transistor (12-T) transition detector (TD) is designed to detect timing information and path activation, which operates stably at a sub-threshold voltage of 0.26 V. Furthermore, a method for selecting the minimum intersection points of critical paths has been proposed to reduce the number of insertion points.Implemented on an ARM Cortex-M0 microcontroller in 22nm technology, this approach reduces the insertion rate from 13.4% to 1.1%, with a total area overhead of only 1.3%. Measurements show that the chip’s power consumption is reduced by 36.9% to 51.1% over a voltage range of 0.42 V to 0.8 V.Keywords
This publication has 18 references indexed in Scilit:
- TEPD: A Compound Timing Detection of Both Data-Transition and Path-Activation for Reliable In-Situ Timing Error Detection and Correction in 28nm CMOS2023
- TG-SPP: A One-Transmission-Gate Short-Path Padding for Wide-Voltage-Range Resilient Circuits in 28-nm CMOSIEEE Journal of Solid-State Circuits, 2019
- A Unified Clock and Switched-Capacitor-Based Power Delivery Architecture for Variation Tolerance in Low-Voltage SoC DomainsIEEE Journal of Solid-State Circuits, 2019
- A Cortex-M3 Based MCU Featuring AVS with 34nW Static Power, 15.3pJ/inst. Active Energy, and 16% Power Variation Across Process and Temperature2018
- Margin Elimination Through Timing Error Detection in a Near-Threshold Enabled 32-bit Microcontroller in 40-nm CMOSIEEE Journal of Solid-State Circuits, 2018
- iRazor: Current-Based Error Detection and Correction Scheme for PVT Variation in 40-nm ARM Cortex-R4 ProcessorIEEE Journal of Solid-State Circuits, 2017
- Variation-Tolerant, Ultra-Low-Voltage Microprocessor With a Low-Overhead, Within-a-Cycle In-Situ Timing-Error Detection and Correction TechniqueIEEE Journal of Solid-State Circuits, 2015
- Razor-Lite: A Light-Weight Register for Error Detection by Observing Virtual Supply RailsIEEE Journal of Solid-State Circuits, 2014
- Bubble Razor: Eliminating Timing Margins in an ARM Cortex-M3 Processor in 45 nm CMOS Using Architecturally Independent Error Detection and CorrectionIEEE Journal of Solid-State Circuits, 2012
- A 27% Active-Power-Reduced 40-nm CMOS Multimedia SoC With Adaptive Voltage Scaling Using Distributed Universal Delay LinesIEEE Journal of Solid-State Circuits, 2012