Failure Analysis of Chromium Plating Layer on the Surface of the Piston Rod of the Hydraulic Jack
Open Access
Abstract
The piston rod of the hydraulic jack was a kind of artillery alloy structural steel of 40Cr and its surface was the chromium plating layer. The piston rod worked for a while; the defects of corrosion pit and peeling appeared on the chromium layer. A stereo-microscope, metallographic microscope, and scanning electron microscope (SEM) were used to observe the macromorphology, micromorphology, and microstructure of the failed parts. The composition analysis was performed by the energy dispersive spectroscopy (EDS), and a Vickers hardness tester was used to measure the hardness. The results showed that pores and penetrating cracks existed in the chromium layer, leading to the corrosion medium invading the interface and forming a corrosion source. Then, the corrosion intensified, resulting in the bubbling, cracking, and peeling of the chromium layer. More O and minor S elements were detected in the corrosion pit. Finally, the fracture of the chromium layer was a 45° angle destruction mode. The peeling of the chromium layer was caused by the pores and microcracks, working medium, and poor working environment. Some suggestions were put forward to prevent the peeling of the chromium layer.Keywords
Funding Information
- the Military civilian science and Technology Collaborative Innova-tion Project (20351801D, 20351801D, 20564401D, ZD2020189)
- S&T Program of Hebei (20351801D, 20351801D, 20564401D, ZD2020189)
- Key Projects of Hebei Provincial Department of Education (20351801D, 20351801D, 20564401D, ZD2020189)
This publication has 11 references indexed in Scilit:
- Crack density and tribological performance of hard-chrome coatingsTribology International, 2018
- Study on properties of double-layered Ni–P–Cr composite coating prepared by the combination of electroless plating and pack cementationJournal of Alloys and Compounds, 2017
- Wear and corrosion resistant laser coatings for hydraulic piston rodsJournal of Laser Applications, 2015
- Failure analysis of an aircraft nose landing gear piston rod endEngineering Failure Analysis, 2013
- Chemometrics applied to functional chromium electroplating by pulse plating techniquesTransactions of the IMF, 2012
- Failure assessment of the hard chrome coated rotors in the downhole drilling motorsEngineering Failure Analysis, 2012
- Rapid Evaluation of Metallic Coatings on Large Cylinders Exposed to Marine EnvironmentsCorrosion, 2011
- Statistical optimization of process parameters to obtain maximum thickness and brightness in chromium platingJournal of Materials Processing Technology, 2007
- Corrosion of chromium plated rotor in drilling fluidSurface and Coatings Technology, 1999
- Hard chromium plating of EDT mill work rollsJournal of Materials Processing Technology, 1999