Geometrical parameters and strength of clinching joint formed with the use of an additional rivet
Open Access
- 13 April 2023
- journal article
- research article
- Published by Springer Nature in Archives of Civil and Mechanical Engineering
- Vol. 23 (2) , 1-16
Abstract
In the publication, the results of an experimental analysis of joint formation by pressing of DX51D steel sheets with thickness of 1.5 (mm) with the use of a rigid punch and an additional deformable rivet of various shapes were presented. The influence of the use of a steel rivet with a diameter d = 5 (mm), similar to the dimensions of the forming punch in the case of the classic clinching variety on the interlock parameters was investigated. The used die was with a four movable segments—dedicated to connections made in the clinch-riveting technology by TOX® PRESSOTECHNIK. In additional, experimental tests were made for joining sheets with a rivet of various shapes, i.e. with a through hole. Joints were formed and the correctness of the upper blockage in the lower sheet was observed on the joints cross-sections. The interlock parameters were measured for each joints samples. In order to compare the influence of using an additional rivet on interlock parameters and joints strength the traditional clinching joints were also made. The minimal thickness of the traditional clinching joint embossment for 2 sheets of 1.5 (mm) thickness for each was X = 0.75 (mm).Keywords
This publication has 21 references indexed in Scilit:
- High-toughness joining of aluminum alloy 5754 and DQSK steel using hybrid clinching–welding processJournal of Materials Processing Technology, 2018
- Clinching for sheet materialsScience and Technology of Advanced Materials, 2017
- Mechanical properties of the two-steps clinched joint with a clinch-rivetJournal of Materials Processing Technology, 2016
- Optimization of a reshaping rivet to reduce the protrusion height and increase the strength of clinched jointsJournal of Materials Processing Technology, 2016
- Numerical and experimental investigations of the reshaped joints with and without a rivetThe International Journal of Advanced Manufacturing Technology, 2016
- Recent and future development of the application of finite element analysis in clinching processThe International Journal of Advanced Manufacturing Technology, 2015
- Mechanical properties of extensible die clinched joints in titanium sheet materialsMaterials & Design (1980-2015), 2015
- Joining by forming—A review on joint mechanisms, applications and future trendsJournal of Materials Processing Technology, 2014
- The clinching joints strength analysis in the aspects of changes in the forming technology and load conditionsThin-Walled Structures, 2014
- The experimental analysis of the double joint type change effect on the joint destruction process in uniaxial shearing testThin-Walled Structures, 2013