Tribological and Micro-Mechanical Properties of Injected Polypropylene Modified by Electron Radiation
Open Access
- 15 July 2023
- journal article
- research article
- Published by MDPI AG in Lubricants
- Vol. 11 (7) , 296
Abstract
Today, more and more importance is given to the improvement of polymer materials’ wear resistance, i.e., their micro-mechanical and tribological properties, which could widen their application in practice. The properties of materials can be modified by several methods, among them exposure to electron radiation. This study focuses on the effect of varying radiation intensity (15 kGy to 99 kGy), depth of penetration, and subsequent structure modification of injection-molded polypropylene on tribological and micro-mechanical properties. Electron radiation influences the structure of individual layers, thus improving or degrading their properties. Hence, the depth of penetration can be examined by instrumented hardness tests and scratch tests. Due to irradiation, surface properties and wear resistance increased by up to 105% (from 38 MPa to 78 MPa). As the results show, an increase in mechanical properties was recorded in the direction towards the center of the sample (from 72 MPa to 82 MPa). Micro-mechanical tests were also confirmed by the observation of cross-linking changes (gel test) as well as crystallinity increases (wide-angle X-ray diffraction and microtome cuts). This finding could have a significant effect on the manufacturing and subsequent modification of injection-molded polypropylene parts, which opens new possibilities in practice for this material. The increased surface wear resistance enables the use of parts for which the durability and abrasion resistance of the surface are demanded, especially in applications facing exposure to long-term cyclical loads (e.g., gears).Keywords
Funding Information
- Zlin Internal Grant Agency (IGA/FT/2023/005)
This publication has 28 references indexed in Scilit:
- The effect of gamma irradiation on the tribological properties of UHMWPE composite filled with HDPEJournal of Thermoplastic Composite Materials, 2012
- Effects of proton and electron irradiation on the structural and tribological properties of MoS2/polyimideApplied Surface Science, 2011
- Impact of cations toward the water tree propensity in crosslinked polyethylene insulationJournal of King Saud University – Engineering Sciences, 2011
- Electron beam irradiations of polypropylene syringe barrels and the resulting physical and chemical property changesRadiation Physics and Chemistry, 2010
- Studies on the effect of electron beam irradiation on waste polyethylene and its blends with virgin polyethyleneJournal of Applied Polymer Science, 2006
- Crosslinking and degradation of polypropylene by electron beam irradiation in the presence of trifunctional monomersRadiation Physics and Chemistry, 2004
- Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodologyJournal of Materials Research, 2004
- Molecular structure and physical properties of E‐beam crosslinked low‐density polyethylene for wire and cable insulation applicationsJournal of Applied Polymer Science, 2002
- The effect of high-energy electron beam on mechanical and thermal properties of LDPE and HDPEEuropean Polymer Journal, 2001
- Radiation crosslinking of polymers-status, current issues, trends and challengesRadiation Physics and Chemistry, 1995