Independent Component Analysis for Improved Defect Detection in Guided Wave Monitoring
Authors:
Open Access
- 15 September 2015
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Proceedings of the IEEE
- Vol. 104 (8) , 1620-1631
Abstract
Guided wave sensors are widely used in a number of industries and have found particular application in the oil and gas industry for the inspection of pipework. Traditionally this type of sensor was used for one-off inspections, but in recent years there has been a move towards permanent installation of the sensor. This has enabled highly repeatable readings of the same section of pipe, potentially allowing improvements in defect detection and classification. This paper proposes a novel approach using independent component analysis to decompose repeat guided wave signals into constituent independent components. This separates the defect from coherent noise caused by changing environmental conditions, improving detectability. This paper demonstrates independent component analysis applied to guided wave signals from a range of industrial inspection scenarios. The analysis is performed on test data from pipe loops that have been subject to multiple temperature cycles both in undamaged and damaged states. In addition to processing data from experimental damaged conditions, simulated damage signals have been added to “undamaged” experimental data, so enabling multiple different damage scenarios to be investigated. The algorithm has also been used to process guided wave signals from finite element simulations of a pipe with distributed shallow general corrosion, within which there is a patch of severe corrosion. In all these scenarios, the independent component analysis algorithm was able to extract the defect signal, rejecting coherent noise.Keywords
Funding Information
- BP plc
- U.K. Research Centre in NDE
- U.K. Engineering and Physical Sciences Research Council
This publication has 26 references indexed in Scilit:
- Statistically-based damage detection in geometrically-complex structures using ultrasonic interrogationStructural Health Monitoring, 2012
- Damage classification in structural health monitoring using principal component analysis and self-organizing mapsStructural Control and Health Monitoring, 2012
- Guided wave health monitoring of complex structures by sparse array systems: Influence of temperature changes on performanceJournal of Sound and Vibration, 2010
- The scattering of the fundamental torsional mode from axi-symmetric defects with varying depth profile in pipesThe Journal of the Acoustical Society of America, 2010
- Analytical prediction and experimental measurement for mode conversion and scattering of plate waves at non-symmetric circular blind holes in isotropic platesWave Motion, 2008
- Strategies for guided-wave structural health monitoringProceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2007
- Time reversal active sensing for health monitoring of a composite plateJournal of Sound and Vibration, 2007
- Mean-Field Approaches to Independent Component AnalysisNeural Computation, 2002
- Fast and robust fixed-point algorithms for independent component analysisIEEE Transactions on Neural Networks, 1999
- NETGEN An advancing front 2D/3D-mesh generator based on abstract rulesComputing and Visualization in Science, 1997