Performance of Composite Portland Cements with Calcined Illite Clay and Limestone Filler Produced by Industrial Intergrinding
Open Access
Abstract
The performance of five composite Portland cements (CPCs) with limestone filler (LF = 10%–25% by mass) and calcined illite clay (CIC = 10%–25% by mass) elaborated by intergrinding was analyzed in paste, mortar, and concrete. Hydration was studied by isothermal calorimetry, bound water, and XRD. Flow and compressive strength (2 to 90 days) were determined in standard mortar. Concretes (w/b = 0.45; binder content = 350 kg/m3; slump = 15 ± 3 cm) were elaborated to determine compressive and flexural strength, water penetration, and chloride migration. Intergrinding CPCs have a large specific surface area when LF + CIC increases, with a similar size range of clinker particles. Supplementary cementing material replacements decreased the heat rate, prolonged the dormant period, and decreased the acceleration rate at early ages. According to the Fratini test, all CPCs had positive pozzolanicity after 28 days, but XRD analysis showed Ca(OH)2 associated with monocarboaluminate phases. Mortar flow was slightly reduced when the proportion of CIC was increased. Mortar strength decreased when the sum of LF + CIC increased. CPC strength class was limited by compressive strength after 28 days. Concretes were workable, and the compressive strength after 28 days depended on the LF + CIC, and CIC contributed after 90 days. After 28 days, the water penetration depended mainly on the LF + CIC content. The chloride migration coefficient was also reduced when CPC contained more CIC and less LF.Keywords
Funding Information
- Agencia Nacional de Promoción de la Investigación, el Desarrollo Tecnológico y la Innovación (PICT 2018-3405)
This publication has 59 references indexed in Scilit:
- Hydration mechanisms of ternary Portland cements containing limestone powder and fly ashCement and Concrete Research, 2011
- The origin of the pozzolanic activity of calcined clay minerals: A comparison between kaolinite, illite and montmorilloniteCement and Concrete Research, 2011
- Water film thickness, flowability and rheology of cement–sand mortarAdvances in Cement Research, 2010
- Influence of limestone on the hydration of Portland cementsCement and Concrete Research, 2008
- Packing density of cementitious materials: part 1—measurement using a wet packing methodMaterials and Structures, 2007
- Composite cements containing natural pozzolan and granulated blast furnace slagMateriales de Construcción, 2006
- Mineral admixtures in mortars: Quantification of the physical effects of inert materials on short-term hydrationCement and Concrete Research, 2005
- Mineral admixtures in mortarsCement and Concrete Research, 2003
- Limestone filler cement in low w/c concrete: A rational use of energyCement and Concrete Research, 2003
- Influence of initial curing on the properties of concrete containing limestone blended cementCement and Concrete Research, 2000