General Analytical Framework for Design of Flexible Reinforced Earth Structures
- 1 November 2006
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Geotechnical and Geoenvironmental Engineering
- Vol. 132 (11) , 1427-1435
Abstract
Current design methods divide reinforced earth structures into walls and slopes by using an arbitrary face inclination of 70° as the boundary. The required maximum strength of reinforcement computed for reinforced walls are significantly higher than that computed for reinforced slopes even if the inclination is practically the same. Presented is a general analytical framework for design of flexible reinforced earth structures regardless of the slope face inclination. In fact, the framework is consistent for any structural geometry and any applicable slope stability analysis although, for demonstration purposes, the simple Culmann formulation is utilized for simple geometry with zero batter. Using an adequate slope stability formulation, the required tensile resistance of reinforcement for a given layout is calculated so as to produce the same prescribed factor of safety anywhere within the reinforced zone. That is, using the design shear strength of the soil, the required reinforcement resistance along ea...Keywords
This publication has 11 references indexed in Scilit:
- Large-Scale Shaking Table Tests on Modular-Block Reinforced Soil Retaining WallsJournal of Geotechnical and Geoenvironmental Engineering, 2005
- Geosynthetic Reinforced Multitiered WallsJournal of Geotechnical and Geoenvironmental Engineering, 2004
- An integrated limiting equilibrium approach for design of reinforced soil retaining structures:Geotextiles and Geomembranes, 2004
- An integrated limiting equilibrium approach for design of reinforced soil retaining structures: Part I—formulationGeotextiles and Geomembranes, 2004
- A new working stress method for prediction of reinforcement loads in geosynthetic wallsCanadian Geotechnical Journal, 2003
- Spatial Distribution of Safety FactorsJournal of Geotechnical and Geoenvironmental Engineering, 2001
- Limit Equilibrium as Basis for Design of Geosynthetic Reinforced SlopesJournal of Geotechnical and Geoenvironmental Engineering, 1998
- Unified Design Approach to Geosynthetic Reinforced Slopes and Segmental WallsGeosynthetics International, 1995
- Performance data for a sloped reinforced soil wallCanadian Geotechnical Journal, 1990
- Geosynthetic Reinforced Soil StructuresJournal of Geotechnical Engineering, 1989