Mercury Ions Removal from Aqueous Solution Using an Activated Composite Membrane
- 3 September 2005
- journal article
- research article
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 39 (19) , 7667-7670
Abstract
This work presents the results concerning the first use of activated composite membranes (ACMs) for the removal of Hg(II) ions from aqueous solution, using as the ligand di-(2-ethylhexyl)dithiophosphoric acid (DTPA). The effects on the removal percentage of Hg(II) of variables such as pH, the nature of the acid, the concentration of mercury (in the feed solutions), and the ligand content (in the membrane) as well as the total surface membrane area exposed to the Hg(II) aqueous solution were studied. During the course of the removal experiments, the membrane was immersed in the Hg(II) aqueous solution in acid media and samples of the solution were taken at different times to enable monitoring of the mercury concentration changes. It was found that when the ACM was prepared with a 1.0 M DTPA casting solution and the feed solution contained 2.49 × 10-4 M Hg(II) in HCl 0.1 M the amount of mercury extracted was higher than 93%. Straightforwardly, additional experiments were carried out with the free-DTPA composite membranes to make up a set of control reference points to verify that removal of the investigated heavy metal was a consequence of the presence of the organic ligand; otherwise there was no Hg(II) concentration variation at all.Keywords
This publication has 14 references indexed in Scilit:
- Methacryloylamidoglutamic Acid Incorporated Porous Poly(methyl methacrylate) Beads for Heavy-Metal RemovalIndustrial & Engineering Chemistry Research, 2004
- Removal of mercury (II) from aqueous solution by activated carbon obtained from furfuralChemosphere, 2003
- Hg(II) extraction by LIX 34. Mercury removal from sludgeHydrometallurgy, 2003
- A glycidyl methacrylate-based resin with pendant urea groups as a high capacity mercury specific sorbentReactive and Functional Polymers, 2003
- Selective recovery of mercury by Procion Brown MX 5BR immobilized poly(hydroxyethylmethacrylate/chitosan) composite membranesHydrometallurgy, 2002
- X-Ray absorption spectroscopy of thiacrown compounds used in the remediation of mercury contaminated waterMicrochemical Journal, 2002
- Removal of mercury from aqueous solutions via polymer-enhanced ultrafiltrationJournal of Membrane Science, 1997
- Kinetics of mercury extraction using oleic acidIndustrial & Engineering Chemistry Research, 1993
- Interaction of mercury(II) and silver(I) with bis[di(2-ethylhexyloxy)thiophosphoryl]disulfideInorganica Chimica Acta, 1992
- Extraction with thio and dithio phosphorus acidsRussian Chemical Reviews, 1989