Finite element modeling and experimental validation of 2D reinforcement braided thin wall structures under internal pressure at various braid angles
- 5 June 2015
- journal article
- review article
- Published by SAGE Publications in Journal of Industrial Textiles
- Vol. 48 (1) , 221-235
Abstract
Reinforcement of the thin-wall structures under internal pressure by braiding method has many applications in different industries. In this way, the effective braid angle determination will be important in achieving a stable and resistant structure. The main aim of this work was finite element modeling and experimental validation of these structures under internal pressure. Therefore, a thin silicon pipe as the core was covered with different braid angles in braiding machine and then was subjected to internal pressure. After that, a finite element model was implemented for a repeatable part of the samples as a unit cell using ANSYS software to calculate the pressure–diameter diagram of the samples. Finally, in order to verify the accuracy of the finite element models was recorded the increase in braided pipes diameter up to rupture by camera and prepared pressure–diameter diagram for all samples by image processing method. The comparison of the finite element method results and image processing showed a good agreement with high accuracy. Also was observed in finite element modeling that the relationship between diameter-pressure in 55 degrees was rather linear, generating forces in the pipe surface of thin silicon due to internal pressure along braid strands direction as confirmed by image analysis.Keywords
This publication has 12 references indexed in Scilit:
- Analysis of Geometrical Parameters using a CAD System for a 3-D Braided PreformTextile Research Journal, 2008
- Effect of braid angle on fatigue performance of biaxial braided compositesInternational Journal of Fatigue, 2006
- A finite element model for failure analysis of 3D braided compositesMaterials Science and Engineering: A, 2004
- Deformation Analysis of 3D Braided Structural CompositesTextile Research Journal, 2003
- Analysis of multi-layered filament-wound composite pipes under internal pressureComposite Structures, 2001
- Deformation and failure mechanisms of braided composite tubes in compression and torsionActa Materialia, 2000
- 3D Structural Simulation of Tubular Braided Fabrics for Net-Shape CompositesTextile Research Journal, 2000
- On the mechanics of braided composites in tensionEuropean Journal of Mechanics - A/Solids, 2000
- Design methodology for a braided cylinderComposite Structures, 1995
- Experimental and analytical characterization of multidimensionally braided graphite/epoxy compositesExperimental Mechanics, 1986