A New Concept of Applying Methanol to Dry Cellulose Insulation at the Stage of Manufacturing a Transformer
Open Access
Abstract
A decisive technical challenge for transformer manufacturers is correctly drying the cellulose insulation. During the production of a transformer, it is necessary to reduce its insulation’s moisture content from about 8% to less than 1% in the shortest possible time period. The drying of insulation is a time-consuming process, and for high-power transformers, it can last up to three weeks. Several drying techniques are used during the production of a transformer, and all of them require heating up the insulation to a high temperature and applying a vacuum. Unfortunately, the use of a high drying temperature above 100 °C can cause a decrease in the degree of cellulose polymerization by over a dozen percentage points. This paper presents a new concept for drying cellulose insulation that does not require heating insulation and applying a vacuum. In this solution, methanol is used as the drying medium. The research results showed the possibility of drying cellulose insulation by means of methanol with different initial moisture contents. The possibility of completely drying pressboard of various thicknesses for a sufficient period of time was also proven. The paper also presents a new concept of both the device and the procedure for drying cellulose insulation by means of methanol.Keywords
This publication has 29 references indexed in Scilit:
- Dissolved Gas Analysis Principle-Based Intelligent Approaches to Fault Diagnosis and Decision Making for Large Oil-Immersed Power Transformers: A SurveyEnergies, 2018
- A Non-Destructive Optical Method for the DP Measurement of Paper Insulation Based on the Free Fibers in Transformer OilEnergies, 2018
- Review of Research Progress on the Electrical Properties and Modification of Mineral Insulating Oils Used in Power TransformersEnergies, 2018
- Review of Physicochemical-Based Diagnostic Techniques for Assessing Insulation Condition in Aged TransformersEnergies, 2016
- Effect of Loads and Other Key Factors on Oil-Transformer Ageing: Sustainability Benefits and ChallengesEnergies, 2015
- Moisture in cellulose insulation of power transformers - statisticsIEEE Transactions on Dielectrics and Electrical Insulation, 2013
- The influence of water content and ageing degree of paper insulation on its mechanical strength2010
- Cellulose insulation in oil-filled power transformers: Part I - history and developmentIEEE Electrical Insulation Magazine, 2006
- Moisture equilibrium in transformer paper-oil systemsIEEE Electrical Insulation Magazine, 1999
- A review of paper aging in power transformersIEE Proceedings C Generation, Transmission and Distribution, 1985