Influence of Rejuvenators on the Physical Properties of RAP Binders
Authors:
- 1 May 2015
- journal article
- research article
- Published by ASTM International in Journal of Testing and Evaluation
- Vol. 43 (3) , 594-603
Abstract
An experimental study was conducted to characterize the physical properties of rejuvenated RAP binders at low, intermediate, and high temperatures via dynamic shear rheometer (DSR) and differential scanning calorimeter (DSC) measurements. A dynamic shear rheometer was used to conduct frequency sweeps at temperatures ranging from −20°C to 80°C in increments of 20°C. The effect of rejuvenators on the thermal behavior of highly aged asphalt binders was also studied by temperature-modulated differential scanning calorimetry (TMDSC). Both DSR and DSC indicate that the interaction between rejuvenators and asphalt binders has different softening effects on RAP binders. Of the four concentrations used in this study, 10 wt. % of rejuvenator appears to be the optimum. 30 wt. % of rejuvenator onto highly aged binder results in material softer than the original RTFO-aged asphalt binders. Rheological results suggest that vegetable oil base and maltene base rejuvenators provide similar flow property improvement for highly aged binders. The DSC results indicate that vegetable-oil-based rejuvenator improves thermal behavior the most as compared to the other two rejuvenators. The results obtained from rheological testing agree with the results from DSC.Keywords
This publication has 10 references indexed in Scilit:
- Structural and rheological characterization of wax modified bitumensFuel, 2012
- The glass transition temperature versus the fictive temperatureJournal of Non-Crystalline Solids, 2007
- Effects of rejuvenator on performance-based properties of rejuvenated asphalt binder and mixturesConstruction and Building Materials, 2007
- Effects of freeze-drying on the glass temperature of cyclic polystyrenesPolymer, 2003
- Effects of entanglement concentration on Tg and local segmental motionsThe European Physical Journal E, 2002
- Characterization of bitumen by differential scanning calorimetryFuel, 1996
- Modulated differential scanning calorimetryJournal of Thermal Analysis and Calorimetry, 1993
- The effect of hydrogen bonding on the glass transition temperatures of polymer mixturesJournal of Polymer Science Part C: Polymer Letters, 1984
- Dependence of the Fictive Temperature of Glass on Cooling RateJournal of the American Ceramic Society, 1976
- Ideal copolymers and the second‐order transitions of synthetic rubbers. i. non‐crystalline copolymersJournal of Chemical Technology & Biotechnology, 1952