In situ reactive compatibilized noryl/LCP blends
Authors:
- 31 May 1995
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 56 (9) , 1015-1028
Abstract
This article reveals that the already known improved properties of the thermoplastic–liquid crystalline polymer (LCP) blends can be further improved substantially over the corresponding noncompatibilized counterparts by using a reactive in situ type compatibilizer, the styrene–glycidyl methacrylate (SG) copolymer. This SG copolymer has been demonstrated in this article to be an effective reactive compatibilizer to improve the processability, heat deflection temperature, and mechanical properties of Noryl/LCP blends. The epoxy functional groups of the SG copolymer can react with the end groups of PPO (in Noryl) and LCP. The in situ‐formed SG–g–LCP copolymer tends to reside along the interface of Noryl–LCP and reduces the interfacial tension during melt processing. The resultant LCP fibers in the Noryl matrix of the compatibilized blends have a higher aspect ratio because the fibers become finer, longer, and tend to form lamellate domains with a greater interphase contact area than those from the noncompatibilized blends. The compatibilized blends also improve the interphase adhesion between Noryl and LCP. The presence of ethyl triphenylphosphonium bromide catalyst promotes the grafting reaction to improve blend compatibilization. © 1995 John Wiley & Sons, Inc.Keywords
This publication has 34 references indexed in Scilit:
- The influence of a copolymer as adhesion promoter for polycarbonate and liquid crystalline polymer blendsJournal of Applied Polymer Science, 1993
- In situ compatibilization of PET/PS blends through reactive copolymersJournal of Applied Polymer Science, 1993
- Characterization of thermotropic liquid crystalline polyester/polysulfone blendsPolymer Engineering & Science, 1992
- Blends of thermotropic polyester with poly(phenylene oxide)Journal of Applied Polymer Science, 1991
- Rheology and morphology of polymer blends containing liquid‐crystalline component in melt and solid stateJournal of Applied Polymer Science, 1991
- Characteristics of hydroxybenzoic acid‐ethylene terephthalate copolymers and their blends with polystyrene, polycarbonate, and polyethylene terephthalatePolymer Engineering & Science, 1988
- Calorimetric study of blends of poly(butylene terephthalate) and a liquid crystalline polyesterJournal of Polymer Science Part B: Polymer Physics, 1987
- Compatibility of poly(butylene terephthalate) with a liquid-crystalline copolyesterJournal of Polymer Science: Polymer Physics Edition, 1984
- Thermal and rheological properties of blends of polystyrene and thermotropic liquid crystalsPolymer Engineering & Science, 1983
- Quantitative thermal analysis of polyblendsPolymer Engineering & Science, 1970