Low-velocity impact behavior of fiber metal laminates
Authors:
- 22 February 2011
- journal article
- other
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 45 (7) , 803-814
Abstract
The low-velocity impact response of a range of fiber metal laminate (FML) panels was investigated through testing and finite element simulations. The objective of this study was to understand the impact-damage resistance of these novel composites, so that they can be designed optimally for impact-resistant aircraft applications. The FML panels were made up of aluminum alloy 7475 T761 and unidirectional S2 glass/epoxy oriented in a cross-ply configuration. Experimental tests were performed using a free-fall drop dart testing machine. The plate specimens were constrained on a circular edge by the clamping fixture. The shape and the nature of the damage inflicted by impact were evaluated using both destructive cross-sectional microphotography and nondestructive ultrasonic techniques. The tests showed that FML laminates are capable of absorbing energy through localized plastic deformation and through failure at the interface between the layers. In particular, delaminations occurred in the back face of the aluminum-alloy sheet and its adjacent fiber-reinforced epoxy layer and in between adjacent fiber-reinforced epoxy layer. The finite element code, LS-DYNA3D, was used to perform numerical simulations of low-velocity impact to predict the complex damage propagations. The computed post-impact deformed shapes and damage patterns were found to be fairly close to experimental results.Keywords
This publication has 11 references indexed in Scilit:
- Structural response of laminated composite plates to blast loadPlastics, Rubber and Composites: Macromolecular Engineering, 2010
- A meshfree penalty-based approach to delamination in compositesComposites Science and Technology, 2009
- Analysis of Bird Impact on a Composite Tailplane Leading EdgeApplied Composite Materials, 2008
- The influence of impactor shape on the damage to composite laminatesComposite Structures, 2006
- Delamination modelling in a double cantilever beamComposite Structures, 2005
- Review of delamination predictive methods for low speed impact of composite laminatesComposite Structures, 2004
- Development of fibre metal laminates for advanced aerospace structuresJournal of Materials Processing Technology, 2000
- Review of low-velocity impact properties of composite materialsComposites Part A: Applied Science and Manufacturing, 1996
- Characterization of composite mesostructures and damage by de-ply radiographyComposites Science and Technology, 1995
- A Progressive Damage Model for Laminated Composites Containing Stress ConcentrationsJournal of Composite Materials, 1987