Synthesis and characterization of novel polyimide/SiO2 nanocomposite materials containing phenylphosphine oxide via sol‐gel technique
Authors:
- 3 November 2009
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 115 (6) , 3256-3264
Abstract
In this article, a series of novel polyimide/silica (PI/SiO2) nanocomposite coating materials were prepared from tetraethoxysilane (TEOS), γ‐glycidyloxypropyltrimethoxysilane (GOTMS), and polyamic acid (PAA) via sol‐gel technique. PAA was prepared by the reaction of 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride (BTDA) and bis (3‐aminophenyl) phenyphosphine oxide (BAPPO) in N‐methyl‐2‐ pyrrolidone (NMP). BAPPO was synthesized hydrogenation of bis (3‐nitrophenyl) phenyphosphine oxide (BNPPO) in the presence of Pd/C. The silica content in the hybrid coating materials was varied from 0 to 20 wt %. The molecular structures of the composite materials were analyzed by means of FT‐IR and 29Si‐NMR spectroscopy techniques. The physical and mechanical properties of the nanocomposites were evaluated by various techniques such as, hardness, contact angle, and optical transmission and tensile tests. These measurements revealed that all the properties of the nanocomposite coatings were improved noticeable, by the addition of sol‐gel precursor into the coating formulation. Thermogravimetric analysis showed that the incorporation of sol‐gel precursor into the polyimide matrix leads to an enhancement in the thermal stability and also flame resistance properties of the coating material. The surface morphology of the hybrid coating was characterized by scanning electron microscopy (SEM). SEM studies indicated that nanometer‐scaled inorganic particles were homogenously dispersed throughout the polyimide matrix © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010Keywords
This publication has 31 references indexed in Scilit:
- Improvements in transmittance, mechanical properties and thermal stability of silica–polyimide composite films by a novel sol–gel routeComposites Science and Technology, 2007
- Polyimide–silica hybrid coatings: morphological, mechanical, and thermal investigationsPolymers for Advanced Technologies, 2007
- Synthesis and cryogenic properties of polyimide–silica hybrid films by sol–gel processPolymer, 2005
- Toughness enhancement of polyimides by in situ generation of silica particlesPolymer, 2004
- Polyimide-silica nanocomposites: spectroscopic, morphological and mechanical investigationsPolymer, 2004
- Organic-Inorganic Hybrid Materials X: Characterization and Degradation of Hydroxyl-Containing Fluorinated Polyimide-Silica HybridsInternational Journal of Polymer Analysis and Characterization, 2003
- Organic/Inorganic Hybrid Network Materials by the Sol−Gel ApproachChemistry of Materials, 1996
- Compatibility of polyimide-silicate ceramers induced by alkoxysilane silane coupling agentsJournal of Non-Crystalline Solids, 1994
- Molecular level ceramic/polymer composites. 2. Synthesis of polymer-trapped silica and titania nanoclustersChemistry of Materials, 1991
- The sol-gel processChemical Reviews, 1990