Dynamic mechanical properties of a TiO2‐filled crosslinked epoxy resin from 20–90°C.
Author:
- 1 August 1967
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 11 (8) , 1475-1481
Abstract
Dynamic mechanical measurements were made with a torsional pendulum of a TiO filled epoxy polymer (crosslinked with hexamethylene diamine) over a temperature range from 20–90°C., at filler concentrations of 0–40 wt.‐%. The second‐order transition temperature (Tg) was raised as the filler content increased. The behavior of TiO2 filler results in a long‐range immobilization of the highly crosslinked system with resultant increases in shear modulus (higher G′) as well as decreased capacity for energy dissipation (lower damping factor). The out‐of‐phase modulus (G″) increased with filler content as well. The magnitudes of the slope parameters Hr (representing G′ data above Tg) and Hg (representing G′ data below Tg) decreased with greater filler content. The possibility is set forth that the TiO2 filler causes a different distribution of mobility around the nitrogen junction as well as a change in the effective number of CH2 units between crosslinks.Keywords
This publication has 7 references indexed in Scilit:
- Effect of crosslinking density on the viscoelastic properties of unsaturated polyestersJournal of Polymer Science Part A: General Papers, 1965
- Polymer–filler interaction: Vapor sorption studiesJournal of Applied Polymer Science, 1964
- Rheologic behavior of epoxy resins in the transition regionJournal of Applied Polymer Science, 1964
- Effect of solid polymer interaction on transition temperature and diffusion coefficientsJournal of Polymer Science Part A: General Papers, 1963
- Viscoelastic Properties of Rubberlike Composite Propellants and Filled ElastomersRubber Chemistry and Technology, 1962
- Effect of carbon black on chain mobility and structure of synthetic rubbersJournal of Polymer Science, 1962
- Analysis of Temperature Dispersion Curves of Dynamic Modulus in Cross-linked PolymersKobunshi Kagaku, 1962