Predictive Reinforcement and Mechanical Characterization of Copper Wire Embedded Polymer Composites Toward Advanced Multifunctional Applications
- 10 April 2026
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 47 (13) , 12177-12194
Abstract
Polymer‐based material extrusion limits to provide the mechanical robustness and unit‐level reinforcement control needed for advanced structural or multifunctional applications. To address this limitation, this work introduces a programmable continuous copper‐wire embedding strategy that enables spatially controlled reinforcement within PLA using a standard extrusion printhead. A process‐derived embedding guideline is established to ensure stable wire deposition preventing drift, breakage, and interfacial defects, thereby enabling reliable fabrication of architected metal‐polymer composites. To generalize reinforcement behavior, a dimensionless Effective Reinforcement Index (ERI) is formulated, integrating metal volume share, modulus mismatch, and geometric stress factors into a predictive design descriptor. ERI correlates strongly with tensile and flexural strength ( R 2 = 0.81 and 0.91), providing a physics‐grounded rule for reinforcement targeting. Mechanical performance is systematically evaluated across wire diameters (0.1–0.3 mm) and hatch spacings using tensile, flexural, and ILSS tests, supported by SEM and X‐ray microscopy of fracture modes and embedding quality. The embedded copper wires yield significant improvements, up to 107% in tensile strength, 203% in modulus, 65% in flexural strength, 285% in flexural modulus, and 36% in ILSS relative to PLA. This study establishes a design‐driven platform for continuous metal‐wire embedding reinforcement in polymer, enabling programmable strengthening and predictive performance guidance for advanced functional composites.Keywords
Funding Information
- National Key Research and Development Program of China (2023YFB4605301)
- Fundamental Research Funds for the Central Universities
This publication has 58 references indexed in Scilit:
- 3D Printing of Continuous Carbon Fiber Reinforced Composites With Cyanate Ester Interpenetrating Polymer Networks for Enhanced Thermo‐Mechanical PropertiesPolymer Composites, 2025
- Continuous Natural Fiber‐Reinforced Polymer Composites ( CNFRPCs ) Manufacturing: Additive Manufacturing Pathways to a Sustainable Future—A Critical ReviewPolymer Composites, 2025
- Recent Advances in the Multifunctional Properties and Applications of Carbon Nanotube/Graphene Hybrid Polymer NanocompositesPolymer Composites, 2025
- A review of 4D printed continuous fiber‐reinforced polymer composites: Materials, structures, and applicationsPolymer Composites, 2025
- Medical grade 3D printable bioabsorbable PLDL/Mg and PLDL/Zn composites for biomedical applicationsJournal of Biomedical Materials Research Part A, 2023
- Regulating the temperature‐sensing behavior of poly(lactic acid) by incorporating multiwalled carbon nanotubes and graphene nanoplateletsPolymer Composites, 2023
- Tailorable mechanical and energy absorption behaviors of 3D printed continuous hybrid fiber reinforced compositesPolymers for Advanced Technologies, 2023
- Effective thermal conductivity of 3D-printed continuous wire polymer compositesProgress in Additive Manufacturing, 2022
- In Vitro Study on Cytocompatibility of Mg Wire/Poly(Lactic Acid) Composite RodsJournal of Materials Engineering and Performance, 2021
- 3D Printing multifunctionality: structures with electronicsThe International Journal of Advanced Manufacturing Technology, 2014