Design of a Broadband Single-Layer Linearly Polarized Reflectarray Using Four-Arm Spiral Elements
Authors:
- Fei XueFXFei Xue
- Hong-Jian WangHWHong-Jian Wang
- Min YiMYMin Yi
- Guang LiuGLGuang Liu
- Xing-Chao DongXDXing-Chao Dong
- 15 August 2016
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 16 (15361225) , 696-699
Abstract
A single-layer broadband reflectarray antenna with four-arm spiral elements is presented. Large range reflection phase has been obtained by varying the length of the arms. The effects of different incident angles on the four-arm element are studied first. Then, a 441-element offset-fed linearly polarized reflectarray is fabricated and measured. The measured results agree well with the simulated results. Measured results show the gain level of 28.35 dB with 1-dB gain bandwidth of 28.7% (12.41-16.31 GHz) and aperture efficiency of 60.2% at center frequency of 13.58 GHz.Keywords
This publication has 14 references indexed in Scilit:
- Enhanced dual‐circular polarised four‐arm Archimedean spiral antenna with low‐profile cavity backingIET Microwaves, Antennas & Propagation, 2015
- A New Broadband Single-Layer Dual-Band Reflectarray Antenna in X- and Ku-BandsIEEE Antennas and Wireless Propagation Letters, 2014
- A Single-Layer Broadband Reflectarray Antenna by Using Quasi-spiral Phase Delay LineIEEE Antennas and Wireless Propagation Letters, 2014
- Simply-Fed Four-Arm Spiral-Helix AntennaIEEE Transactions on Antennas and Propagation, 2014
- Broadband Reflectarray Antennas Using Double-Layer Subwavelength Patch ElementsIEEE Antennas and Wireless Propagation Letters, 2010
- Broadband Reflectarray Antenna Incorporating Disk Elements With Attached Phase-Delay LinesIEEE Antennas and Wireless Propagation Letters, 2010
- Broadband Design of a Single Layer Large Reflectarray Using Multi Cross Loop ElementsIEEE Transactions on Antennas and Propagation, 2009
- Wideband reflectarrays using artificial impedance surfacesElectronics Letters, 2007
- Broadband design of three-layer printed reflectarraysIEEE Transactions on Antennas and Propagation, 2003
- Design of two-layer printed reflectarrays using patches of variable sizeIEEE Transactions on Antennas and Propagation, 2001