Quantifying and Mitigating the Impact of Asymmetric Induced Hydraulic Fracturing from Horizontal Development Wellbores
Authors:
- 26 September 2016
- conference paper
- Published by Society of Petroleum Engineers (SPE)
Abstract
Sufficient production and fracture mapping evidence across North America is now available to clearly demonstrate that pairs of delineation and development wells often underperform when there is substantial production time (months or years) between the completions of the two wells. The relative degree of impact on hydrocarbon extraction per acre varies from one play or formation to another, but the phenomena is generally attributed to asymmetric induced fracturing from the development (child) well into the previously partially drained and lower static pressure delineation (parent) well reservoir volume. This paper briefly discusses two solutions that have been employed to minimize the negative fiscal ramifications and improve recovery. Rigorous 3D unstructured grid reservoir modeling can assist in the quantification of the phenomena; however, options for mitigating the problem for cases where the impact is extreme are typically limited. Synthetic history matching and forward modeling were performed with a grid-based numerical simulator that mimicked a series of asymmetric oblique fractures interacting with a drained reservoir volume, comparing acceleration of reserve recovery and total recovered reserves with a similar case involving symmetric fracturing. Two scenarios for preventing extreme asymmetric fracturing are discussed. These included dramatic shortening of the time between completions, and performing pressure sink mitigation (PSM) via refracturing of the delineation wellbore. It is shown that the asymmetric fracturing into drained volumes can materially impact reserves and rate of recovery if the acreage position of a given project is substantial. It is demonstrated that the overall stimulated reservoir system permeability, the degree of permeability contrast between reservoir layers, and the degree of asymmetry are all factors that have an impact on the degree to which the long-term time between completions affects recovery of hydrocarbons over and above simple volumetric depletion. Integration of rigorous 3D reservoir modeling and far-field fracture mapping have established that the negative ramifications of extreme induced fracture asymmetry can be overcome with careful application of drilling and completion (D&C) timing and offset drainage pressure management process.Keywords
This publication has 20 references indexed in Scilit:
- Enabling cross-discipline collaboration and forward modeling through advanced subsurface geocellular earth modelingBulletin of Canadian Petroleum Geology, 2015
- Refracturing Design for Underperforming Unconventional Horizontal Reservoirs2015
- Using the Wrong Method to Estimate Stress From Depletion Causes Significant Errors in Predicting Wellbore Integrity and Fracture Geometry2015
- An Improved Workflow for Evaluating the Performance of Hydraulically Fractured Wells in Unconventional Reservoirs through Production History Matching using Unstructured Grid-Based Reservoir Simulation2015
- Refracturing on Horizontal Wells in the Eagle Ford Shale in South Texas - One Operator’s Perspective2015
- The Impact of Laminated Rock on Hydraulic Fracture Propagation in Unconventional Resources2014
- Declining Frac Effectiveness - Evidence that Propped Fractures Lose Conductivity, Surface Area, and Hydraulic Continuity2013
- Play-Wide Well Performance Analysis in Montney Siltstone2012
- Barnett Shale Horizontal Restimulations: A Case Study of 13 Wells2012
- Restimulation of Unconventional Reservoirs: When Are Refracs Beneficial?Journal of Canadian Petroleum Technology, 2011