Prediction and improvement of dielectric breakdown between arc contacts in Gas circuit breaker
Authors:
- 1 October 2013
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Abstract
Arc energy affects strongly the performance of circuit breaker. Especially it is the important note that hot gas distribution and pressure rise generated by arc can cause dielectric breakdown and restrike in gas circuit breaker after a fault current is interrupted. For the intimate observation of such phenomena and then designer's better understanding in this study, it carried out the calculation of the hot gas flow characteristics by arc and electric field intensity from transient recovery voltage during contact separation in gas circuit breaker using commercial CFD program. For the modeling of circuit breaker, it required the technologies including the movements the mechanical contacts using moving mesh, the initialization and extinction of an electric arc and nozzle ablation as the physical phenomena. At the conclusion, it will be discussed about the relation between heat transfer and performance prediction and shown about the effect of design index to stabilize thermal distribution.Keywords
This publication has 7 references indexed in Scilit:
- Gas-Flow Simulation With Contact Moving in GCB Considering High-Pressure and High-Temperature Transport Properties of SF$_6$GasIEEE Transactions on Power Delivery, 2005
- Optimization of Dead Tank Gas Circuit Breaker Design Based on Quantification of Hot Gas Flow and Dielectric PropertiesIEEE Transactions on Power Delivery, 2004
- Calculation of the uniform breakdown field strength of SF/sub 6/ gasIEEE Transactions on Dielectrics and Electrical Insulation, 1998
- A computational fluid dynamics simulation of high- and low-current arcs in self-blast circuit breakersJournal of Physics D: Applied Physics, 1997
- Thermodynamic properties and transport coefficients in SF6-Cu mixtures at temperatures of 300-30000 K and pressures of 0.1-1 MPaJournal of Physics D: Applied Physics, 1994
- Modelling of an ablation controlled arcJournal of Physics D: Applied Physics, 1993
- Composition and transport properties of SF6and their use in a simplified enthalpy flow arc modelProceedings of the IEEE, 1971