Development of Zinc Coating Methods on Fiber Bragg Grating Temperature Sensors
Authors:
- 5 January 2016
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 26 (3) , 1-6
Abstract
To make practical use of the high-temperature superconducting (HTS) magnets, it is effective to detect a sign of failures by temperature monitoring. Because quench protection of HTS magnets is difficult, HTS magnets have temperature distribution when it is cooled by conduction cooling. Therefore, a reliable multipoint temperature monitoring method is necessary. Unlike the conventional resistance temperature sensor, the optical temperature sensor can measure multipoint temperatures with a single fiber. The optical fiber is not affected by the fluctuation of magnetic field and has low heat invasions. A fiber Bragg grating (FBG) is a type of the optical fiber temperature sensor. When the FBG sensor thermally contracts, the refractive index of it changes and the wavelength of the light reflected from it changes. The thermal expansion rate of an optical fiber decreases at cryogenic temperature. Therefore, the accuracy of the measurement also decreases. It has been proposed to coat the FBG sensor with a metal or a resin to increase thermal contraction at cryogenic temperature. Zinc is suitable for the coating material because it has high thermal expansion rate and its coating process is simple. Three types of zinc coating methods were evaluated in this paper, namely, sputtering, electroplating after sputtering titanium and copper, and electroplating after electroless nickel plating. The production cost of these methods was evaluated. These zinc-coated FBG sensors were compared in the sensitivity at cryogenic temperature, the durability against vibration and thermal shock, and the repeatability during the cooling cycle. We report the evaluation results of the zinc coating method on the optical fibers as a cryogenic temperature sensor.Keywords
Funding Information
- Ministry of Land, Infrastructure, Transport and Tourism of Japan
This publication has 13 references indexed in Scilit:
- Measurement and improvement of characteristics using optical fiber temperature sensors at cryogenic temperaturesPhysica C: Superconductivity and its Applications, 2011
- Superconducting magnetic bearing for a flywheel energy storage system using superconducting coils and bulk superconductorsPhysica C: Superconductivity and its Applications, 2009
- Design parameter evaluation of a metal recoated Fiber Bragg Grating sensors for measurement of cryogenic temperature or stress in superconducting devicesCryogenics, 2009
- Development of a superconducting claw-pole motorPhysica C: Superconductivity and its Applications, 2008
- Performance of a conduction-cooled high-temperature superconducting bearingMaterials Science and Engineering: B, 2008
- Performance evaluation of metal-coated fiber Bragg grating sensors for sensing cryogenic temperatureCryogenics, 2008
- Comparison of maglev behavior of three inductors with static and dynamic field interacting with a HTC superconductor: Test and evaluationPhysica C: Superconductivity and its Applications, 2006
- Superconducting motors and generators for naval applicationsPhysica C: Superconductivity and its Applications, 2003
- Centrifuge advances using HTS magnetic bearingsPhysica C: Superconductivity and its Applications, 2001
- The application of high temperature superconductors to Maglev magnetsApplied Superconductivity, 1995