Influence of Stress Ratio on the Elevated‐Temperature Fatigue of a Silicon Carbide Fiber‐Reinforced Silicon Nitride Composite
Author:
- 1 July 1991
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 74 (7) , 1639-1645
Abstract
The influence of stress ratio on the tensile fatigue behavior of a unidirectional SiC‐fiber/Si 3 N 4 ‐matrix composite was investigated at 1200°C. Tensile stress ratios of 0.1, 0.3, and 0.5 were examined. Fatigue testing was conducted in air, at a sinusoidal loading frequency of 10 Hz. For peak fatigue stresses below the proportional limit of the composite (approximately 195 MPa at 1200°C) specimens survived 5 × 10 6 cycles, independent of stress ratio. At peak stresses above the proportional limit, fatigue failures were observed; fatigue life decreased significantly as the stress ratio was lowered from 0.5 to 0.1. Creep appears to be the predominant damage mechanism which occurs during fatigue below the proportional limit. Both mechanical cycle‐by‐cycle fatigue damage and creep contribute to specimen failure at peak stresses above the proportional limit.Keywords
This publication has 26 references indexed in Scilit:
- Monotonic and Cyclic Behavior of a Silicon Carbide/Calcium-Aluminosilicate Ceramic Composite1990
- Cyclic Fatigue Crack Propagation in Alumina under Direct Tension—Compression LoadingJournal of the American Ceramic Society, 1989
- Fracture of Si3N4–SiC Whisker Composites under Cyclic LoadsJournal of the American Ceramic Society, 1988
- Fatigue and stress rupture of silicon carbide fibre-reinforced glass-ceramicsJournal of Materials Science, 1987
- Crack propagation in ceramics under cyclic loadsJournal of Materials Science, 1987
- Fatigue strength of sintered Si3N4 under rotary bendingJournal of Materials Science Letters, 1987
- Dynamic fatigue crack growth in polycrystalline alumina under cyclic compressionJournal of Materials Science Letters, 1986
- Creep of chemically vapour deposited SiC fibresJournal of Materials Science, 1986
- Comparison of Static, Cyclic, and Thermal-Shock Fatigue in Ceramic Composites1982
- Static and Cyclic Fatigue Behavior of a Polycrystalline AluminaJournal of the American Ceramic Society, 1972