In Operando Detection of the Onset and Mapping of Lithium Plating Regimes during Fast Charging of Lithium-Ion Batteries
- 17 June 2020
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 12 (27) , 30438-30448
Abstract
Existing in operando methods for detection of plated lithium can only detect the presence of plating after the charge is complete and irreversible damage has already occurred. In this work, the characteristic potential minimum on the graphite electrode during high rate lithiation is proposed and assessed as an in operando technique for detecting the onset of lithium plating. While other studies have shown that rapid self-heating of a cell can cause this type of “voltage overshoot”, we confirm through temperature-controlled coin cell experiments that such a voltage profile can also be caused by the occurrence of severe lithium plating. In cells which demonstrated voltage overshoot, macroscopically observable lithium plating films were present on the graphite electrodes upon disassembly, resulting in very poor single-cycle Coulombic efficiency. The significance of this voltage characteristic is confirmed through direct observation of the onset of lithium plating in an in situ optical microscopy cell. We observe that the growth of large metallic lithium deposits within the porous electrode structure can cause swelling and cracking of the graphite electrode, suggesting loss of active material due to mechanical electrode degradation as an important consequence of severe lithium plating.Keywords
Funding Information
- Office of Naval Research (N00014-17-1-2942)
This publication has 57 references indexed in Scilit:
- A review of lithium deposition in lithium-ion and lithium metal secondary batteriesJournal of Power Sources, 2014
- Nondestructive detection, characterization, and quantification of lithium plating in commercial lithium-ion batteriesJournal of Power Sources, 2014
- Optical observation of Li dendrite growth in ionic liquidElectrochimica Acta, 2013
- Synthesize battery degradation modes via a diagnostic and prognostic modelJournal of Power Sources, 2012
- Effects of Electrolyte Composition on Lithium Plating in Lithium-Ion CellsJournal of the Electrochemical Society, 2011
- Thermodynamic and kinetic properties of the Li-graphite system from first-principles calculationsPhysical Review B, 2010
- Direct in situ measurements of Li transport in Li-ion battery negative electrodesChemical Physics Letters, 2010
- Electrochemical properties and Li deposition morphologies of surface modified graphite after grindingJournal of Power Sources, 2009
- Noteworthy electroanalytical features of the stage 4 to stage 3 phase transition in lithiated graphiteJournal of Solid State Electrochemistry, 2003
- Theory of progressive nucleation and growth accounting for the ohmic drop in the electrolyte. IJournal of Applied Electrochemistry, 1990