Preparation and Composition Optimization of PEO:MC Polymer Blend Films to Enhance Electrical Conductivity
Open Access
Abstract
The polymer blend technique was used to improve amorphous phases of a semicrystalline polymer. A series of solid polymer blend films based on polyethylene oxide (PEO) and methylcellulose (MC) were prepared using the solution cast technique. X-ray diffraction (XRD), Polarized optical microscope (POM), Fourier transform infrared (FTIR) and electrical impedance spectroscopy (EIS) were used to characterize the prepared blend films. The XRD and POM studies indicated that all polymer blend films are semicrystalline in nature, and the lowest degree of crystallinity was obtained for PEO:MC polymer blend film with a weight ratio of 60:40. The FTIR spectroscopy was used to identify the chemical structure of samples and examine the interactions between chains of the two polymers. The interaction between PEO and MC is evidenced from the shift of infrared absorption bands. The DC conductivity of the films at different temperatures revealed that the highest conductivity 6.55 × 10−9 S/cm at ambient temperature was achieved for the blend sample with the lowest degree of crystallinity and reach to 26.67 × 10−6 S/cm at 373 K. The conductivity relaxation process and the charge transport through the hopping mechanism have been explained by electric modulus analysis. The imaginary part of electrical modulus M″ shows an asymmetrical peak, suggesting a temperature-dependent non-Debye relaxation for the PEO:MC polymer blend system.Keywords
This publication has 63 references indexed in Scilit:
- Polymer-polymer miscibility in PEO/cationic starch and PEO/hydrophobic starch blendsExpress Polymer Letters, 2010
- A new biodegradable bone wax substitute with the potential to be used as a bone filling materialJournal of Materials Chemistry, 2007
- Advanced, high-performance composite polymer electrolytes for lithium batteriesJournal of Power Sources, 2006
- Studies on an ionically conducting polymer nanocompositeJournal of Power Sources, 2006
- Miscibility studies of the blends of chitosan with some cellulose ethersCarbohydrate Polymers, 2006
- Characterizations of chitosan‐ammonium triflate (NH4CF3SO3) complexes by FTIR and impedance spectroscopyPhysica Status Solidi (a), 2006
- Novel composite polymer electrolyte comprising poly(ethylene oxide) and triblock copolymer/mesostructured silica hybrid used for lithium polymer batteryElectrochimica Acta, 2005
- Miscibility studies of PVC blends (PVC/PMMA and PVC/PEO) based polymer electrolytesSolid State Ionics, 2002
- Viscoelastic properties of plasticized methylcellulose and chemically crosslinked methylcelluloseCarbohydrate Polymers, 2001
- Solid state electrochromic device: behaviour of different salts on its performanceSolid State Ionics, 2000