Synthesis of Flexible Polyamide Aerogels Cross-Linked with a Tri-Isocyanate
Open Access
Abstract
A new series of flexible polyamide (PA) aerogels was synthesized using terephthaloyl chloride (TPC), 2,2′-dimethylbenzidine (DMBZ) and cross-linked with an inexpensive, commercially available tri-isocyanate (Desmodur N3300A) at polymer concentrations of 6–8 wt.% total solids and repeating units, n, from 30 to 60. The cross-linked DMBZ-based polyamide aerogels obtained, after supercritically drying using liquid CO2, had shrinkages of 19–27% with densities ranging from 0.12 g/cm3 to 0.22 g/cm3, porosity and surface areas up to 91% and 309 m2/g, respectively, and modulus values ranging from 20.6 to 109 MPa. Evidence suggests that a higher flexibility could be achieved using DMBZ in the polyamide backbone with N3300A as a cross-linker, when compared to previously reported TPC-mPDA-BTC PA aerogels, N3300A-polyimide aerogels, and N3300-reinforced silica aerogels.Keywords
Funding Information
- National Aeronautic and Space Administration under Fundamental Aeronautics Program
This publication has 37 references indexed in Scilit:
- Distributed activation energy treatment of polyimide aerogel and its blocking effect on thermal runaway propagation of ternary batteryJournal of Energy Storage, 2024
- Three-dimensional nanostructures of crosslinked aramid nanofibers with exceptional mechanical and thermal insulation characteristicsApplied Surface Science, 2024
- Mechanism of Hydration Induced Stiffening and Subsequent Plasticization of Polyamide AerogelAdvanced Materials Interfaces, 2023
- Direct fabrication of poly(p-phenylene terephthalamide) aerogel and its composites with great thermal insulation and infrared stealthChemical Engineering Journal, 2020
- Density and shrinkage as guiding criteria for the optimization of the thermal conductivity of poly(urethane)-class aerogelsJournal of Sol-Gel Science and Technology, 2019
- Facile fabrication of mechanical monolithic polyamide aerogels via a modified sol–gel methodJournal of Sol-Gel Science and Technology, 2017
- Facile fabrication of multifunctional monolithic polyamide aerogelsJournal of Porous Materials, 2017
- Correlation of microstructure and thermal conductivity in nanoporous solids: The case of polyurea aerogels synthesized from an aliphatic tri-isocyanate and waterJournal of Non-Crystalline Solids, 2013
- Injectable Biodegradable Polyurethane Scaffolds with Release of Platelet-derived Growth Factor for Tissue Repair and RegenerationPharmaceutical Research, 2008
- Isocyanate-crosslinked silica aerogel monoliths: preparation and characterizationJournal of Non-Crystalline Solids, 2004