Additive Manufacturing via Direct Ink Writing of Customized Silicone Foam for Diverse Applications
Preprint
- 20 January 2025
- preprint
- Published by MDPI AG in Preprints.org
Abstract
Direct ink writing (DIW) enables the additive manufacturing of silicone elastomers, offering an alternative to traditional moulding and casting methods for applications such as healthcare products to machine-human interaction sensors. Polydimethylsiloxane (PDMS) foam, a porous silicone elastomer, is valued for its elasticity, chemical and thermal resistance, hydrophobicity, and biocompatibility. The emulsion templating method is a simple and cost-effective approach to create silicone foams by incorporating and later removing of sacrificial dispersed phase from the PDMS precursor. This study developed glycerol/PDMS emulsion-based inks for DIW using high-shear centrifugal mixing, with ethanol as a solvent to remove the glycerol template, creating silicone foam. An optimal glycerol dosage of 50 parts per hundred rubber (phr) produced foam with 27.63% porosity and pore diameter up to 4.66 µm. Each 10 phr increase in glycerol content raised porosity by 10% and average pore diameter by 2 µm. Both tensile and compressive behaviour inversely correlated with porosity, with a 10% porosity rise in the silicone foam reducing tensile strength by 0.07 MPa and stiffness by 0.02 MPa. Models with strong data alignment were developed to benefit researchers in 3D printing to customize silicone foams (pores properties, mechanical properties, compressive properties) based on specific application requirements.Keywords
All Related Versions
- Version 1, 2025-01-20, Preprints
- Published version: Processes, 13 (3), 677.
This publication has 64 references indexed in Scilit:
- Direct ink writing of programmable functional silicone‐based composites for 4D printing applicationsInterdisciplinary Materials, 2022
- Synthesis and characterization of porous polydimethylsiloxane structures with adjustable porosity and pore morphology using emulsion templating techniquePolymer Engineering & Science, 2021
- Silicone Surface FundamentalsMacromolecular Rapid Communications, 2020
- 3D Printed Multifunctional, Hyperelastic Silicone Rubber FoamAdvanced Functional Materials, 2019
- Particle‐Free Emulsions for 3D Printing ElastomersAdvanced Functional Materials, 2018
- Facile Preparation of the Porous PDMS Oil‐Absorbent for Oil/Water SeparationAdvanced Materials Interfaces, 2016
- Highly Sensitive Pressure Sensor Based on Bioinspired Porous Structure for Real‐Time Tactile SensingAdvanced Electronic Materials, 2016
- Entropic, electrostatic, and interfacial regimes in concentrated disordered ionic emulsionsRheologica Acta, 2016
- Characterization of 3D elastic porous polydimethylsiloxane (PDMS) cell scaffolds fabricated by VARTM and particle leachingJournal of Applied Polymer Science, 2015
- Preparation, characterization, and silanization of 3D microporous PDMS structure with properly sized pores for endothelial cell cultureBiotechnology and Applied Biochemistry, 2015