Experimental research on load bearing capacity of adhesively jointed beech timber lamellas
Authors:
- 3 December 2019
- conference paper
- Published by Vilnius Gediminas Technical University
Abstract
The aim of this work was to verify behavior of a beech timber finger-joint in local conditions in the Central Europe. The samples were produced with a glued joint with the finger length of 23 mm according to standard ČSN EN 14 080. Commonly used polyurethane adhesive for production of engineered wood products in the Czech Republic was used. The samples were loaded by destructive four-point bending tests according to standard ČSN EN 408, and the achieved bending strength was statistically evaluated and compared with results of non-glued samples. The results showed that bending strength of lamellas with a finger-joint reached about 65% of the strength of samples without a joint, and the failure of lamellas occurred in most cases at the joint.Keywords
This publication has 9 references indexed in Scilit:
- Evaluation of suitability of selected hardwood in civil engineeringGrađevinski materijali i konstrukcije, 2018
- Model for residential house element and material selection by neutrosophic MULTIMOORA methodEngineering Applications of Artificial Intelligence, 2017
- Effect of geometry and hybrid adhesive on strength of finger joints ofPinus elliottiisubject to humidity and temperatureThe Journal of Adhesion, 2017
- Finger-jointed Eucalyptus globulus with 1C-PUR adhesive for high performance engineered laminated productsConstruction and Building Materials, 2017
- Experimental investigation on full-scale glued oak solid timber beams for structural bearing capacityConstruction and Building Materials, 2016
- Quality assessment of glued ash wood for construction engineeringEuropean Journal of Wood and Wood Products, 2015
- Experimental and numerical analyses of the structural response of adhesively reconstituted beech timber beamsComposite Structures, 2015
- FE analysis and geometrical optimization of timber beech finger-joint under bending testInternational Journal of Adhesion and Adhesives, 2014
- Feasibility of glued laminated timber beams with tropical hardwoodsEuropean Journal of Wood and Wood Products, 2013