Cyclic behavior of gravel–steel interface under varying rotational shear paths
Authors:
- 1 March 2021
- journal article
- research article
- Published by Canadian Science Publishing in Canadian Geotechnical Journal
- Vol. 58 (3) , 305-316
Abstract
Cyclic rotational behavior of a soil–structure interface is imperative for understanding the three-dimensional behavior; this requires testing the interface under systematically varying rotational shear paths. A series of cyclic tests were conducted on the gravel–steel interface along linear, elliptical, and circular shear paths by systematically varying the orthogonal amplitude shear displacement ratio. The resultant peak shear stress was observed to be independent of the shear direction and dependent on the shear path. The interface demonstrates a coupling response among the orthogonal shear directions during the rotational shear, which governs the three-dimensional shear mechanism. Owing to such coupling, during the cyclic shear, the unloading extent from the resultant peak loading state at different quarters of a shear cycle diminishes as the shear path changes toward a circle; this leads to the monotonous shear proceeding in a circular route with an insignificant change in the shear direction. Significant dilatancy is induced by rotational shear, which can be divided into irreversible and reversible components. The final compression of the irreversible dilatancy increases as the area under the rotational shear path increases. The reversible dilatancy diminishes as the shear path becomes a circle. The interface evenly demonstrates aeolotropy under the rotational shear condition.Keywords
This publication has 26 references indexed in Scilit:
- Permanent deformation characteristics of saturated sand under cyclic loadingCanadian Geotechnical Journal, 2015
- Dilatancy of the interface between a structure and gravelly soilGéotechnique, 2011
- Drained Deformation Behavior of Anisotropic Sands during Cyclic Rotation of Principal Stress AxesJournal of Geotechnical and Geoenvironmental Engineering, 2010
- Undrained anisotropy and rotational shear in granular soilGéotechnique, 2007
- Large-scale Apparatus for Monotonic and Cyclic Soil-Structure Interface TestGeotechnical Testing Journal, 2006
- Monotonic and Cyclic Tests of Interface between Structure and Gravelly SoilSoils and Foundations, 2006
- Cyclic Rotational Simple-Shear Behaviour of Sand-Steel InterfacesSoils and Foundations, 1998
- An Automated Apparatus for Three-Dimensional Monotonic and Cyclic Testing of InterfacesGeotechnical Testing Journal, 1996
- Frictional Resistance at Yield between Dry Sand and Mild SteelSoils and Foundations, 1986
- Sand Response to Cyclic Rotation of Principal Stress Directions as Induced by Wave LoadsSoils and Foundations, 1983