Design of Artificial Metal Rough Surfaces for Ultrawideband RCS Reduction Based on Approximate Ray Launching Geometrical Optics
- 13 November 2024
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 24 (2) , 379-383
Abstract
This letter proposes an approximate ray launching geometrical optics (ARL-GO) method for designing the profiles of 1D and 2D artificial metal rough surfaces (AMRS) to realize ultra-wideband radar-cross section (RCS) reduction. The method transforms AMRS's height and gradient into the electromagnetic wave's amplitude and phase, achieving fast calculation of AMRS's RCS. Combined with the constrained multi-objective particle swarm optimization (PSO) algorithm, the AMRSs can format good diffuse scattering of incoming plane waves. Under normal incidence, the final optimized polarization-insensitive 1D and 2D AMRSs can realize 20 dB RCS reduction at frequencies of above 7.6 and 6.7 GHz respectively with no upper limit frequency. While the incident angle reaches 40°, the designed AMRSs can still achieve 20 dB RCS reduction above 10 GHz, achieving good stealth performance. The theoretical analysis, simulation, and experimental results are in good agreement.Keywords
Funding Information
- National Natural Science Foundation of China (U2141233, 62171416)
- Beijing Natural Science Foundation (4244069)
This publication has 19 references indexed in Scilit:
- Wideband Radar-Cross-Section Reduction Using Parabolic Phased MetasurfacesIEEE Antennas and Wireless Propagation Letters, 2023
- Realization of Single-Layer Fourier Phased Metasurfaces for Wideband RCS ReductionIEEE Antennas and Wireless Propagation Letters, 2023
- Optically Transparent Ultrawideband Electromagnetic Stealth Metasurface for Microwave Absorption and ScatteringIEEE Antennas and Wireless Propagation Letters, 2022
- A Fast Method for SBR-Based Multiaspect Radar Cross Section Simulation of Electrically Large TargetsIEEE Antennas and Wireless Propagation Letters, 2022
- A Ray-Tracing Intracluster Model With Diffuse Scattering for mmWave CommunicationsIEEE Antennas and Wireless Propagation Letters, 2021
- A Prismatic Conformal Metasurface for Radar Cross-Sectional ReductionIEEE Antennas and Wireless Propagation Letters, 2020
- Novel Interval Parameter Identification Method Using Augmented Fourier Series-Based Polynomial Surrogate ModelIEEE Access, 2019
- Cylindrically Curved Checkerboard Surfaces for Radar Cross-Section ReductionIEEE Antennas and Wireless Propagation Letters, 2018
- A Multihybrid FE-BI-KA Technique for 3-D Electromagnetic Scattering From a Coated Object Above a Conductive Rough SurfaceIEEE Geoscience and Remote Sensing Letters, 2016
- Simulation of 3-D random rough surface by 2-D digital filter and fourier analysisInternational Journal of Machine Tools and Manufacture, 1992