A Wireless Passive Sensing System for Displacement/Strain Measurement in Reinforced Concrete Members
Open Access
Abstract
In this study, we show a wireless passive sensing system embedded in a reinforced concrete member successfully being employed for the measurement of relative displacement and strain in a simply supported beam experiment. The system utilizes electromagnetic coupling between the transceiver antenna located outside the beam, and the sensing probes placed on the reinforcing bar (rebar) surface inside the beam. The probes were designed in the form of a nested split-ring resonator, a metamaterial-based structure chosen for its compact size and high sensitivity/resolution, which is at µm/microstrains level. Experiments were performed in both the elastic and plastic deformation cases of steel rebars, and the sensing system was demonstrated to acquire telemetric data in both cases. The wireless measurement results from multiple probes are compared with the data obtained from the strain gages, and an excellent agreement is observed. A discrete time measurement where the system records data at different force levels is also shown. Practical issues regarding the placement of the sensors and accurate recording of data are discussed. The proposed sensing technology is demonstrated to be a good candidate for wireless structural health monitoring (SHM) of reinforced concrete members by its high sensitivity and wide dynamic range.Keywords
Funding Information
- TÜBİTAK (112E255)
This publication has 40 references indexed in Scilit:
- Sub-Millimeter Displacement Sensing by Passive UHF RFID AntennasIEEE Transactions on Antennas and Propagation, 2013
- Passive wireless antenna sensor for strain and crack sensing—electromagnetic modeling, simulation, and testingSmart Materials and Structures, 2013
- Experimental Study of Highly Sensitive Sensor Using a Surface Acoustic Wave Resonator for Wireless Strain DetectionJapanese Journal of Applied Physics, 2012
- Corrosion detection using low-frequency RFID technologyInsight - Non-Destructive Testing and Condition Monitoring, 2012
- Passive wireless structural health monitoring sensor made with a flexible planar dipole antennaSmart Materials and Structures, 2012
- Fastener Failure Detection Using a Surface Acoustic Wave Strain SensorIEEE Sensors Journal, 2011
- Passive RFID Strain-Sensor Based on Meander-Line AntennasIEEE Transactions on Antennas and Propagation, 2011
- Force sensor system for structural health monitoring using passive RFID tagsSensor Review, 2009
- State of the art in wireless sensing with surface acoustic wavesIEEE Transactions on Industrial Electronics, 2001
- A review of wireless SAW sensorsIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2000