Design and Evaluation of a Passive Alcove-Based Microfluidic Mixer
- 13 January 2009
- journal article
- research article
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 81 (4) , 1622-1627
Abstract
A novel passive microfluidic silicon mixer has been designed, optimized and fabricated. The architecture of the mixer consists of a simple “T” junction, made up by a 20 μm wide by 82 μm deep channel, followed by three repeats of an alcove, each with a triangular obstruction, arranged in a zigzag fashion. Numerical simulations were employed to optimize the geometry, particularly the dimensions of the alcoves, the relative orientation and the spacing between them, and the degree of intrusion associated with them. The simulation results demonstrate that chaotic flow due to recirculation within the alcoves results in transverse velocity that promotes effective fluid mixing. The microfluidic mixer with the simulation-optimized geometry was fabricated with photolithographic techniques and characterized by optical imaging, fluorescence, and Raman microscope spectroscopy. At a sample flow rate of 20 μL/s, the mixer exhibits a short mixing deadtime of ∼22 μs and a high mixing efficiency under both low and high viscosity conditions. The alcove-based microfluidic silicon mixer offers unique advantages for its short deadtime and slow sample consumption rate. In addition, it provides a valuable component for laboratory-on-a-chip applications for its ease of development into multiple networks for massively parallel analytical processes.Keywords
This publication has 28 references indexed in Scilit:
- Chaotic mixing on a micromixer with barriers embeddedChaos, Solitons & Fractals, 2007
- A Rapid Flow Mixer with 11-μs Mixing Time Microfabricated by a Pulsed-Laser Ablation Technique: Observation of a Barrier-Limited Collapse in Cytochrome c FoldingJournal of the American Chemical Society, 2007
- Optimization of a Microfluidic Mixer for Studying Protein Folding KineticsAnalytical Chemistry, 2006
- Microfluidic mixers: from microfabricated to self-assembling devicesPhilosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2004
- Introduction: mixing in microfluidicsPhilosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2004
- Designing for chaos: applications of chaotic advection at the microscalePhilosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2004
- Simple quantitative optical method for monitoring the extent of mixing applied to a novel microfluidic mixerAnalytica Chimica Acta, 2004
- Optimizing layout of obstacles for enhanced mixing in microchannelsSmart Materials and Structures, 2002
- Efficient mixing at low Reynolds numbers using polymer additivesNature, 2001
- CytochromecFolding and Unfolding: A Biphasic MechanismAccounts of Chemical Research, 1998