Strap Repair Optimization by Using Embedded Patches
- 12 November 2012
- journal article
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 730-732, 1036-1041
Abstract
Adhesively-bonded techniques offer an attractive option for repair of aluminium structures, and currently there are three widely used configurations, i.e., single-strap (SS), double-strap (DS) and scarf repairs. SS and DS repairs are straightforward to execute but stresses in the adhesive layer peak at the ends of the overlap. DS repairs additionally require both sides of the damaged structures to be reachable for repair, which is often not possible. In these repair configurations, some limitations emerge such as the weight, aerodynamic performance and aesthetics. The scarf repair is more complex to fabricate but stresses are more uniform along the adhesive bondline. Few studies of SS and DS repairs with embedded patches, such that these are completely flush with the adherends, are available in the literature. Furthermore, no data is available about the effects of geometrical and material parameters (e.g. the Young’s modulus of adhesive, E) on the mechanical behaviour optimization of embedded repairs. For this purpose, in this work standard SS and DD repairs, and also with embedded patches in the adherends, were tested under tension to allow the geometry optimization, by varying the overlap length (LO), thus allowing the maximization of the repairs strength. The influence of the patch embedding technique, showing notorious advantages such as aerodynamic or aesthetics, was compared in strength with standard strap repairs, for the viability analysis of its implementation. As a result of this work, some conclusions were drawn for the design optimization of bonded repairs on aluminium structures.Keywords
This publication has 11 references indexed in Scilit:
- Strength prediction of single- and double-lap joints by standard and extended finite element modellingInternational Journal of Adhesion and Adhesives, 2011
- Modelling the tensile fracture behaviour of CFRP scarf repairsComposites Part B: Engineering, 2009
- Alternative Methods to Measure the Adhesive Shear Displacement in the Thick Adherend Shear TestJournal of Adhesion Science and Technology, 2008
- Evaluation of different lap-shear joint geometries for automotive applicationsInternational Journal of Adhesion and Adhesives, 2007
- Fully-coupled nonlinear analysis of single lap adhesive jointsInternational Journal of Solids and Structures, 2007
- Modelling single and double-lap repairs on composite materialsComposites Science and Technology, 2005
- Computational analysis of geometric nonlinear effects in adhesively bonded single lap composite jointsComposites Part B: Engineering, 2003
- Modulus Graded Composite Adherends for Single-Lap Bonded JointsJournal of Composite Materials, 2002
- Shape optimisation of adhesive filletsInternational Journal of Adhesion and Adhesives, 2000
- Stress Analysis and Failure Properties of Carbon-Fibre-Reinforced-Plastic/Steel Double-Lap JointsThe Journal of Adhesion, 1986