Creep Testing of Thermoplastic Fiber-Reinforced Polymer Composite Tubular Coupons
Open Access
Abstract
Thermoplastic fiber-reinforced polymer composites (TP-FRPC) are gaining popularity in industry owing to characteristics such as fast part fabrication, ductile material properties and high resistance to environmental degradation. However, TP-FRPC are prone to time-dependent deformation effects like creep under sustained loading, which can lead to significant dimensional changes and affect the safe operation of structures. Previous research in this context has focused, mainly, on testing of flat coupons. In this study, a creep testing method for TP-FRPC tubular coupons was developed. Specimens were fabricated using tape winding and subjected to well-defined loading conditions, i.e., pure hoop tensile and pure axial compressive stress. Strain gauges and digital image correlation were both employed for strain measurements and were found to be in good agreement. The evolution of strain rate, Poisson’s ratio and creep compliance were investigated. The prediction of experimental data by the Burgers model and the Findley’s power law model were explored. The research findings suggest that the developed experimental and analysis approach provides valuable information for the design of material systems and structures.Keywords
Funding Information
- Natural Sciences and Engineering Research Council of Canada (CRDPJ 501618-16)
- Alberta Innovates - Technology Futures (G2016000119)
This publication has 40 references indexed in Scilit:
- Understanding corrosion of flexible pipes at subsea oil and gas wellsMRS Bulletin, 2018
- A review of the design and analysis of reinforced thermoplastic pipes for offshore applicationsJournal of Reinforced Plastics and Composites, 2017
- Analysis of the non-linear load and temperature-dependent creep behaviour of thermoplastic composite materialsJournal of Thermoplastic Composite Materials, 2016
- Prediction of long term performance for GRP pipes under sustained internal pressureComposite Structures, 2015
- Pipeline failures in corrosive environments – A conceptual analysis of trends and effectsEngineering Failure Analysis, 2015
- Long-term behaviour of GFRP pipes: Reducing the prediction test durationPolymer Testing, 2010
- Large diameter pipe: lasting function in a world of growthReinforced Plastics, 2008
- Behaviour of ±45° glass/epoxy filament wound composite tubes under quasi-static equal biaxial tension–compression loading: experimental resultsComposites Part B: Engineering, 2003
- Durability of Closed-End Pressurized GRP Filament Wound Pipes under Hygrothermal Aging Conditions. Part II: Creep TestsJournal of Composite Materials, 1996
- Prediction of the long-term creep compliance of general composite laminatesExperimental Mechanics, 1986