Prediction of the Performance of Spark Ignition Gas Engines Including Knock
Authors:
- J. GaoJGJ. Gao
- 1 October 1993
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
A two-zone predictive model for the performance of a spark ignited gas engine is described. In this model, an effective mass burning rate and energy release pattern based on an estimate of the combustion duration are developed. For any given engine and set of operating conditions the pressure-time and temperatures-time histories, and hence performance parameters such as indicated power output, peak pressure, optimum spark timing, etc. are predicted. Through monitoring the chemical reaction activity, while employing detailed chemical kinetics of the end gas within the unburnt zone, the incidence of autoignition and knock can also be predicted. A dimensionless knock criterion that compares the specific energy release due to end gas preignition reaction activity to the specific energy release due to combustion of the fuel is developed and used to test for the incidence of knock and its severity. The predicted performance appears to agree well with measured experimental behaviour when methane is the fuel.Keywords
This publication has 25 references indexed in Scilit:
- Experimental and Analytical Studies of the Lean Operational Limits in Methane Fuelled Spark Ignition and Compression Ignition EnginesSAE International Journal of Advances and Current Practices in Mobility, 1989
- A Diagnostic Two-Zone Combustion Model for Spark-Ignition Engines Based on Pressure-Time DataSAE International Journal of Advances and Current Practices in Mobility, 1988
- Estimating Heat-Release and Mass-of-Mixture Burned from Spark-Ignition Engine Pressure DataCombustion Science and Technology, 1987
- Room at the piston top contributions of combustion science to engine designSymposium (International) on Combustion, 1985
- Modeling Flame Propagation and Heat Release in Engines—An Introductory Overview1980
- Applications of Engine Combustion Models—An Introductory Overview1980
- Engine Combustion Modeling—An Overview1980
- A simulation model including intake and exhaust systems for a single cylinder four-stroke cycle spark ignition engineInternational Journal of Mechanical Sciences, 1975
- Prediction of NO Formation in Spark-Ignited Engines—An Analysis of Methods of ControlCombustion Science and Technology, 1971
- Motion Pictures of Engine Flames Correlated with Pressure CardsSAE International Journal of Advances and Current Practices in Mobility, 1938