Influence of Material Property Variation on Computationally Calculated Melt Pool Temperature during Laser Melting Process
Open Access
Abstract
Selective Laser Melting (SLM) is a popular additive manufacturing (AM) method where a laser beam selectively melts powder layer by layer based on the building geometry. The melt pool peak temperature during build process is an important parameter to determine build quality of a fabricated component by SLM process. The melt pool temperature depends on process parameters including laser power, scanning speed, and hatch space as well as the properties of the build material. In this paper, the sensitivity of melt pool peak temperature during the build process to temperature dependent material properties including density, specific heat, and thermal conductivity are investigated for a range of laser powers and laser scanning speeds. It is observed that the melt pool temperature is most sensitive to melt pool thermal conductivity of the processed material for a set of specific process parameters (e.g., laser power and scan speed). Variations in the other mechanical–physical properties of powder and melt pool such as density and specific heat are found to have minimal effect on melt pool temperature.Keywords
Funding Information
- Advratech, LLC (669845)
This publication has 25 references indexed in Scilit:
- Selective laser melting of Ti6Al4V alloy for biomedical applications: Temperature monitoring and microstructural evolutionJournal of Alloys and Compounds, 2014
- Medical design: Direct metal laser sintering of Ti–6Al–4VMaterials & Design (1980-2015), 2010
- A pragmatic model for selective laser melting with evaporationActa Materialia, 2009
- Effects of process variables and size-scale on solidification microstructure in beam-based fabrication of bulky 3D structuresMaterials Science and Engineering: A, 2009
- Three-dimensional transient finite element analysis of the selective laser sintering processJournal of Materials Processing Technology, 2009
- Temperature gradient mechanism in laser forming of thin platesOptics & Laser Technology, 2007
- Finite element modeling of transmission laser microjoining processJournal of Materials Processing Technology, 2007
- Thermal process maps for predicting solidification microstructure in laser fabrication of thin-wall structuresJournal of Materials Processing Technology, 2006
- Thermophysical Properties of Solid and Liquid Ti-6Al-4V (TA6V) AlloyInternational Journal of Thermophysics, 2006
- 3D FE simulation for temperature evolution in the selective laser sintering processInternational Journal of Machine Tools and Manufacture, 2004